So 2 nights ago I was driving home and went to hit the cruise cuz I was tired and half paying attention. Hit the button and got nothing. Tried it a few times and it never worked. Tried it again last night on the way home from school and same thing. It worked Saturday afternoon and then Sunday night it didn't. What can I do to fix it?
T-RAV99 GMC | 5.3 | Skinny White Guy Tuned
Check the fuses, one might have blown on you. Then check the linkage on the throttle body to make sure that it didnt come off. Then vacuum lines to the cruise control diaphram if there is one. Start easy then look deeper.
2007 Chevy Silverado Classic 4.3L V6
Magnaflow Muffler, CFM Technologies CNC Machined High Flow Vortec Throttle Blades, STS Rear Turbo, Intercooler, Accell Distributor and Coil, 8mm wire, Autolite Platinum plugs, Runs out of fuel at 4000RPM. Marine intake with larger injectors soon. Hoping to squeeze 10psi.
does the light come on on the dash?....or do u get absolutley nothing when u hit the button? i.e. no light or anything?
No light at all.
I get absolutely nothing. It's like I'm not pushing the button at all.
I'll check the fuses and linkage when I get home from work.
T-RAV99 GMC | 5.3 | Skinny White Guy Tuned
do you have LED tail lights or an LED third brake light??
R.I.P Blue '02
'08 - 5.3
Vette Servo, Flowmaster 40
my silverado would do a wierd thing. cruise always worked then it wouldnt. i found out that if i hit the brake pedal then apply the cruise button my cruise would work normally. I dont remember if it did this back when it was an auto but since its been a t56 thats how mine is.
2002 Lightning - GT headed 5.5Litre w/ Twin 7665s
2002 Silverado - 427Lsx w/ Twin gt4202s
2010 Silverado crewcab Z71 - 5.3litre w/ procharger
2000 Wrangler - 5.3litre with some stance
2014 Xsport- 3.5 Eco boost
412 Motorsports
it ain't that I'm too big to listen to the rumors, It's just that I'm too damn big to pay attention to 'em..That's the difference
is the switch on? lol
04 5.3
224/224 .566 .566 114
3200 Circle D
LT's
60e
Nelson Tuned
p1sc in closet
There is no fuse for cruise only in most cases nor is there any vacuum lines involved at all. It's been a long time since the trucks have had a vacuum servo. Need a scan to give you inhibit reason and to check brake switch parameter. Worst case is the worm gear in the cruise module is stripped....$1 part that is not serviced to kill a $450 cruise module. Once again, still need to verify cruise switch and brake switch operation.
Sounds like a good time to visit the local picknpull or ebay for a replacement part.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
actually the abs fuse controls something in the cruise feature.
2002 Lightning - GT headed 5.5Litre w/ Twin 7665s
2002 Silverado - 427Lsx w/ Twin gt4202s
2010 Silverado crewcab Z71 - 5.3litre w/ procharger
2000 Wrangler - 5.3litre with some stance
2014 Xsport- 3.5 Eco boost
412 Motorsports
it ain't that I'm too big to listen to the rumors, It's just that I'm too damn big to pay attention to 'em..That's the difference
Posting Permissions
Reply With Quote
