ok here are some pics but i have to cut out the center V because i didnt check it and its to wide ,but any way not to shaby i think ans of corse im not done yet but its a heck of a start!
![]()
ok here are some pics but i have to cut out the center V because i didnt check it and its to wide ,but any way not to shaby i think ans of corse im not done yet but its a heck of a start!
![]()
http://www.streetsourcemag.com/ViewOwnerProfile.aspx?ProfileID=39253[/url]
http://s133.photobucket.com/albums/q...sizerst/truck/
ok here are some pics with it installed ...i made it exactly 3in tall and it was tight but it fit perfectly and i show in the pics how i did every thing ...it was easy !!!
before i put it in
after ( i had to bend up those two tabs for it to fit)
the pvc gutter pipe thing
marked and ready to cut out
cut out
pipe installed (i need more clamps)
the front view
what you guys think???
Last edited by FullsizeRST; 06-12-2009 at 08:51 PM.
http://www.streetsourcemag.com/ViewOwnerProfile.aspx?ProfileID=39253[/url]
http://s133.photobucket.com/albums/q...sizerst/truck/
looks cool, and clean install.
1982 c10 lsx swaped, NP tuned, true duals, 4:11s, trutrac, e-fans, CAI
thanks man ..sorry for high jack thread here
the best part is you can see it when the hood is open pluse i think im going to put a couple LEDs in side it
http://www.streetsourcemag.com/ViewOwnerProfile.aspx?ProfileID=39253[/url]
http://s133.photobucket.com/albums/q...sizerst/truck/
that thing look pretty sweet! i would like to see the results you get out of it...clean setup keep us updated!![]()
Barks better than it bites......
looks good but will it perform? show us pics of the finished project.
03 Silverado Extended Cab with 06 front end, Cai, Road Ripper 2000 Trans
im sure it will get better results than pulling out the head light at the track
when i pulled the head light out at the track it was good for about 3 tenths.so with me having 2-3in ducks going straight to the filter im sure it would work ....im only wanting to suck in clean cool air and not hot air from under the hood
pluse it only cost a couple dollars to make in tubing,pipe clamps, and pvc
the finished pic is above
i will have better results saturday im going to the track to find out what she will do
http://www.streetsourcemag.com/ViewOwnerProfile.aspx?ProfileID=39253[/url]
http://s133.photobucket.com/albums/q...sizerst/truck/