13 axles
200,000+ lbs
100+' long
and it's 6 inches too high ........
dont know what the hell we're going to do.
13 axles
200,000+ lbs
100+' long
and it's 6 inches too high ........
dont know what the hell we're going to do.
2002 Tahoe 4.8 - soon to be turbo'd - SOLD
1989 Mustang - LX Vert - 351W-TT - 2inches of dust covering it
2012 Raptor - 497rwhp at 10psi
If you aint breaking - you aint going fast enough
unload it where it's too low and drive it through then put it back on the trailer and continue on.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
let air out of the tires of the crane you carrying should bring it down. We've had to let air out of some of our equipment tires to get them some places
txstvanwilder: but i got lube so i didnt complain
mean05: he told me a price and i bent over and lubed up
truckinL33: 6'' is not enough, and 12'' is too much
pcmcobra: don't drink and bid on egay...lol
408.Luke: lol im not blowing im investing
just cut the top off.
flatten all the tires on the carried vehicle.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
...running start...
lol yeah if you get enough momentum i'm sure you can make it.Originally Posted by DamnYankee
...running start...
Set up a ramp, wind that Kenworth out and prey.
2006 SilveradoLittle Black Bitch
wish was that easy ....... hehe
2002 Tahoe 4.8 - soon to be turbo'd - SOLD
1989 Mustang - LX Vert - 351W-TT - 2inches of dust covering it
2012 Raptor - 497rwhp at 10psi
If you aint breaking - you aint going fast enough
Y'all can't air down the tires on the crane your hauling?
txstvanwilder: but i got lube so i didnt complain
mean05: he told me a price and i bent over and lubed up
truckinL33: 6'' is not enough, and 12'' is too much
pcmcobra: don't drink and bid on egay...lol
408.Luke: lol im not blowing im investing
Posting Permissions
Reply With Quote
