yeah...my harness came off an 02 and it is drive by cable
yeah...my harness came off an 02 and it is drive by cable
I am missing a few items from the motor.
1. AC unit and hoses.
2. Alternator
3. Starter
I know my AC hoses will not work but will my ac compressor, alternator and starter from the 4.3 bolt to the 6.0l?
I am making a trip to the salvage yard today, what motor mounts will I need for the swap. IE 4.8 5.3 mounts work with the 6.0l?
yeah get the mounts from a 5.3, 4.8 and get the frame mounts and the motor mounts.
some of the acc will swap over from the v6...asssuming you already have the bracket on the 6.0....
read here
I know the flywheel from the 6.0l will not work with my 4l60e but will the flywheel from the 4.3l bolt to the 6.0l?
What year 6.0l? Early models will work with the 4.3L flywheel. Late model won't. Measure how much crankshaft sticks out of the rear cover. If you bolt it to the crank and it wont turn because its against the back of the block, its a newer engine and won't work obviously.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Guys,
I have my harness and TB swap completed but have a question about the DBC harness. The mechanical TB has two electrical connections but it seems my harness has three? The third connection is an in line 4 plug connector that has one red wire pinned?
mass air flow wire connector?
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
that goes to the alternator.....yes....score one for me!!
A picture is worth a thousand guesses.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
no pic...the only plug that is 4-pin and only has 1 wire is the alternator...has to be
Posting Permissions
Reply With Quote