I did away with the box on the volant and put a k&n filter on it. What I like about it is you can trim your shroud with the volant and use a 1' throttle body spacer can't do that with the k&n. Loved the whistle when i had it.
Too bad thats all the Throttle body spacer is good for... Unless you tap it and install a nitrous nozzle, they are worthless. Except for the whistle.
yeah thats basically what i was getting at. not much good for anything other than that
I like my whistling nitrous plate LOL
2005 rcsb silverado 4.8L, Full bolt ons, obx lt's, ory, comp xr265hr hi lift, Nitrous outlet plate kit, built 4l65e, J-H shift kit, 2500 stall,3.73 G80 , 3 inch spintech cat back, tuned by Rick at Synergy motorsports
I put my nitrous plate on and dropped one full tenth in the eighth without even hooking the juice up. I don't understand how, I'm not one to argue with results.Maybe it was the weather, who knows?
![]()
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Weird Greg...maybe you were holding you mouth differently that pass...![]()
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
I have a volant intake and exhaust on my truck and while they both perform well the fitment was crappy and the customer service from Volant was even worse.
2008 Nissan Titan Crew Cab 4x2
426hp and 444tq at the rear wheels