Got to taking the tbi stuff out of my old harness last night. Gm should be ashamed of themselves for that gorilla glue like substance they submerged the passenger side firewall passthrough with.
Got to taking the tbi stuff out of my old harness last night. Gm should be ashamed of themselves for that gorilla glue like substance they submerged the passenger side firewall passthrough with.
Obs engine and tranny out. Going to order bumpstick,harness,fuel pump,ac relo bracket,etc in a day or two.
yes you can, hook the output wire to the grey wire going to the fuel pump.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
I agree 100% about the passthrough. I am ashamed of them. Hurry up so you can load some pics!
a heat gun helps soften it so you can pull the wires loose.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
After one or two wires I knew something had to give. I went and got the ole heat gun.Originally Posted by RedHeartbeat
I had same problem on my 96 harness. Its a simple fix the harness in held in by a clip behind glove box. Just pop glove box out and youll have access to it. no cutting or heat gun needed.
Check out this throttle body. http://www.ebay.com/itm/NEW-LS1-LS6-...sories&vxp=mtr Heard alot of good things on ls1tech about these.
Been in Vegas this past week. Ordered my cable tb, filled out my tune form for np. It wont be long now. The only thing on my tune form that puzzled me is I dont know how much TM to take out. Im running a 4L80 OUT OF A 03 2500HD.
Little update. Got my harness ordered today. Got cam ordered today the specs are 222/226 113 +2 597/598. Let me know what u think on that grind. Geoff hooked me up with it
Last edited by cottontop11; 04-17-2012 at 03:22 AM.
Posting Permissions
Reply With Quote