First of all I want to say thanks to Hitman X for his help in finding all the parts that I needed. Man a 3000 stall feels awesome in my truck. It actually can get moving. Now I just need to figure out why my vehicle speed sensor isnt working. The actual sensor is working but the computer isnt getting the signal. No speedo abs light is on and it wont shift outta first all b/c of the sensor readings. Anyone have any ideas. I already checked the fuse for the abs and put the voltmeter on the vss and it is putting out a signal. I think Im going to try an ohm load test and see if there is a break in the wire.
Reply With Quote
thats all I want. Maybe by the time the tune gets good and settled in it will do it. I only have about 80 miles on it since I switched out the computer so Im going to give it another 200 miles or so then ask allen for a retune if it doesnt do it. I got a transgo hd2 shift kit five pinion planetaries all alto eagle red clutches raybestos 2nd gear band pinless accumilator piston hardened output shaft what was called a torque drive package bacisally a reaction gear shell with a hardened input shaft transgo seperator plate new silonoids( i know i spelt it wrong) a billet od servo already had the vette servo. I think with all that my tranny could handle shifting like that. I love the manners of my TCI stall it keeps the engine up where it sounds good through my exhaust. And lots of rice want to race me now cause they think Im trying and Im only half way into it then when they turn their fart can up I just punch it and let them listen to a real exhaust. 
