+ Reply to Thread
Results 1 to 10 of 29

Thread: gauges????

Hybrid View

  1. #1
    Join Date
    Dec 2009
    Location
    DIrty south AZ
    Posts
    1,020

    gauges????

    hey anyone ever heard of these gauges?

    http://www.glowshiftdirect.com/00-06...e-package.aspx


    im thinking of getting a 3 gauge piller mainly to watch my trans temps when i pull a trailer. also what would be the best other 2 gauges to run and why? thanks for the info guys!
    Built 2 Run! 6XX HP/ 6XX TQ

  2. #2
    Join Date
    Mar 2011
    Location
    Amarillo TX
    Posts
    199
    i've never heard of them, not a bad price though.

    if it were me, i would get a fuel pressure gauge. that might just be me though, i've gone through about 3 fuel pump in the last 3 years though. could be handy

  3. #3
    Join Date
    Dec 2009
    Location
    DIrty south AZ
    Posts
    1,020
    ya im not gunna run more than a cam and bolt on;s just wondering what else would be good, like a air pressure or a wide band or something or if id even need wide band? hell idk? haha
    Built 2 Run! 6XX HP/ 6XX TQ

  4. #4
    Join Date
    Mar 2011
    Location
    Amarillo TX
    Posts
    199
    Quote Originally Posted by darnie1987 View Post
    ya im not gunna run more than a cam and bolt on;s just wondering what else would be good, like a air pressure or a wide band or something or if id even need wide band? hell idk? haha
    a buddy of mine has a wideband on his terminator cobra. he's running close to 600 rwhp though. and to be honest, i don't even know what he uses it for. i mean that and the fuel pressure and most of the others aren't going to do a whole lot except confirm that something is wrong, if and when something does go wrong. ya know?

  5. #5
    Join Date
    Sep 2005
    Location
    Austin Tx.
    Posts
    13,138
    Quote Originally Posted by NAREJEPP View Post
    a buddy of mine has a wideband on his terminator cobra. he's running close to 600 rwhp though. and to be honest, i don't even know what he uses it for. i mean that and the fuel pressure and most of the others aren't going to do a whole lot except confirm that something is wrong, if and when something does go wrong. ya know?
    he runs a wideband because his termi is supercharged. Monitors air/fuel so it wont go kaboom.
    1951 3100
    1984 C10

  6. #6
    Join Date
    Aug 2007
    Location
    Honeywood, Ontario
    Posts
    6,994
    Glowshift is junk. I run a wideband, fuel pressure and nitrous pressure.
    2006 Silverado
    Little Black Bitch

  7. #7
    Join Date
    Dec 2009
    Location
    DIrty south AZ
    Posts
    1,020
    Quote Originally Posted by ducky View Post
    he runs a wideband because his termi is supercharged. Monitors air/fuel so it wont go kaboom.


    my though with wide band is i always here guys on here using it as a tuning reference? my question is would i even need it with bolt'ons and a cam? i do wanna run a 3 gauge piller but idk what other 2 gauges besides a trans temp?
    Built 2 Run! 6XX HP/ 6XX TQ

  8. #8
    Join Date
    Mar 2011
    Location
    Amarillo TX
    Posts
    199
    Quote Originally Posted by ducky View Post
    he runs a wideband because his termi is supercharged. Monitors air/fuel so it wont go kaboom.
    well yea, but it's not like you look down at it while you're dd-ing. and if it goes funny halfway through a WOT pull, then you've got problems i would venture to say you would feel/notice before you ever looked at the gauge. like some others have said, i always took as more of a tuning tool rather than being a permenantly installed gauge.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts