+ Reply to Thread
Results 1 to 10 of 12

Thread: how fast is the average Hemi

Hybrid View

  1. #1
    Join Date
    May 2008
    Location
    verona, virgina
    Posts
    626

    how fast is the average Hemi

    Just curious how quick hemi rams are in stock to intake exhaust form? I know it varies if its rcsb 2wd-4door 4x4 and so on. So anyone know what they run in the 1/4 and 1/8 in all the cab and drivetrain setups?
    03 yukon xl:intake, longtubes ory,performabuilt lvl2,circle D 278,tune, tint, lt1 fans
    92 z28: lb9 air foil vette servo magnaflow catback adjustable pan hard rod Lcas lcarbs
    86 trans am: lm7 hot cam th350 3500 stall

  2. #2
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    depends on what year model. The newest Hemis are kicking ass and taking names. I think they're rated around 414 hp.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  3. #3
    Join Date
    May 2008
    Location
    verona, virgina
    Posts
    626
    i guess i need to be more specificlike the 03-till just before the newest body style

    like this
    03 yukon xl:intake, longtubes ory,performabuilt lvl2,circle D 278,tune, tint, lt1 fans
    92 z28: lb9 air foil vette servo magnaflow catback adjustable pan hard rod Lcas lcarbs
    86 trans am: lm7 hot cam th350 3500 stall

  4. #4
    i've seen QC's run 15.2-15.8 in 1/4

  5. #5
    Join Date
    Nov 2010
    Location
    Durant, Ok
    Posts
    186
    I don't know what 1/4's they would run but I have a buddy with an 06 ecsb 5.3 with CAI, and longtubes, 4.10s and tuned put 285 to the tires i think, and I have another buddy with a ccsb 06 5.7 hemi with a flowmaster. The hemi had him by a little over a truck in the quarter. It was kind of upsetting.........
    Josh ----- 95 Z71 ecss -6.0 swap finished 10k miles ago, nelson tuned, built tranny, 2800 converter, 4.56s truetrac
    2000 z28 a4 longtubes, true duals, ported throttle body, ls6 intake, slp lid (lost in divorce lol)
    79 camaro small block street car 11.60 @ 116 (sold)

  6. #6
    Join Date
    May 2008
    Location
    Crowder, OK
    Posts
    8,005
    Quote Originally Posted by scarybowtie View Post
    I don't know what 1/4's they would run but I have a buddy with an 06 ecsb 5.3 with CAI, and longtubes, 4.10s and tuned put 285 to the tires i think, and I have another buddy with a ccsb 06 5.7 hemi with a flowmaster. The hemi had him by a little over a truck in the quarter. It was kind of upsetting.........
    I outran a RCSB Daytona with 4.56s and programmer with my bolt on, tuned 5.3. Then I outran it by bus lengths with it on a 125 shot.

    1969 Chevy RCLB C10 350/TH400 SOLD
    2007 Chevy RCSB 4.8 4x4 LS SOLD
    2008 Chevy RCSB 5.3 4x4 LT SOLD
    2010 Chevy CCSB 6.2 4x4 LT SOLD
    2005 GMC CCLB DRW 6.6 Duramax 4x4 191,000 and counting
    2013 FORD CCSB F350 6.7 Powerstroke 4x4


  7. #7
    Join Date
    May 2008
    Location
    verona, virgina
    Posts
    626
    Quote Originally Posted by scarybowtie View Post
    I don't know what 1/4's they would run but I have a buddy with an 06 ecsb 5.3 with CAI, and longtubes, 4.10s and tuned put 285 to the tires i think, and I have another buddy with a ccsb 06 5.7 hemi with a flowmaster. The hemi had him by a little over a truck in the quarter. It was kind of upsetting.........
    ive out ran a couple that had just in my yukon and i surely weigh more than a ecsb. mainly just kind of curious of what i need to expect when i get pushed into racing them ya know they dont like the "hemi" sticker i sport on my back glass lol i never ran any before i started moding but i still have some mods to go before i have full bolton.
    03 yukon xl:intake, longtubes ory,performabuilt lvl2,circle D 278,tune, tint, lt1 fans
    92 z28: lb9 air foil vette servo magnaflow catback adjustable pan hard rod Lcas lcarbs
    86 trans am: lm7 hot cam th350 3500 stall

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts