my 04 rcsb is the work truck edition and has manuel windows and locks.im wanting to change it over to power.i know everthing i got to do except the wiring.not sure how to wire it bein it didn't come from factory with power.i figured some of you might have done this change before.if so i could use some pointers how to wire it.thanks in advance
If you lived in az i could get on all data pro and it tell ya how to do most things like that...
Built 2 Run! 6XX HP/ 6XX TQ
i used to have access to all data pro but not anymore but i do have access to gm website
Are you adding an aftermarket kit or factory parts?
2005 black Yukon XL SLT - traded in for me wife's new Fusion (GM sucks these days)
2002 black Yukon SLT (the skinny sister)
1969 green Pontiac GTO (Layla, AKA the black sheep)
INSTALLS AND MORE.. http://www.ls1truck.com/forums/my-ga...-low-life.html
Sticky/broken gauges? I can help. PM me for details.
To do it completely with factory stuff you would need the BCMs/switches for both doors, door harnesses, dash harness, Main BCM and some reflashing probably. It would probably be a lot cheaper to just put in the factory regulators and make you own wiring with universal switches.
yeah i wanted to do it factory cuz i wanted it to look factory but someone told me about a place in jacksonville fl..aabout 3 hrs from me..they will do windows and locks aftermarket for around 400 bucks..i might just do that..i was hoping to find everthing i need at junkyard but i ain't had any luck finding anything
Posting Permissions
Reply With Quote
