So I have an autometer phanton gauge. I was going to change the backlight out in it because it went out and I noticed that the boost tubing was torn from the fitting.
If anyone has the tubing already inserted into the fitting so that I can just change that out and now have to buy a completely new gauge and assembly that would be great.
They obviously need to already be attached.
1951 3100
1984 C10
they sell 'tubing' kits at autozone for like 6 bucks. You SHOULD be able to just put a new ferrell in the fitting and reattach that hose.
blown transmissions are about as useful as 97% of the guys on this forum
I tried to get the tubing back through the ferrell but its being a bitch and it wont go.
1951 3100
1984 C10
If it don't fit, spit on it
2006 SilveradoLittle Black Bitch
you can buy a new ferrel to repair it, they're about $.05
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
The old ferrel is still good. Everything is still good. Just the damn tube wont go into the ferrel. LOL
1951 3100
1984 C10
get a new one, they're a one time use item. They're not like condoms, you can't wash them out and reuse them.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
haha yeah I just read that on another site, I did not know that.
1951 3100
1984 C10
Posting Permissions
Reply With Quote
