I cant get my truck to crank over. Changed Batteries, cleaned cables, I'm almost positive the starter is clicking. I'm going to pull the starter off and see if its bad first. Any other ideas??
I cant get my truck to crank over. Changed Batteries, cleaned cables, I'm almost positive the starter is clicking. I'm going to pull the starter off and see if its bad first. Any other ideas??
2003 SIERRA- 5.3 DD
1985 SWB C10- slow, future plans- shaved, painted, 6.0/4l80e
There is a starter relay in the electical box under the hood. Swap it for another similar to it and see if that fixes it.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
I will go get one I think thats what it is but if the relay is bad......will the starter still click?
2003 SIERRA- 5.3 DD
1985 SWB C10- slow, future plans- shaved, painted, 6.0/4l80e
it shouldnt cus if the relay is bad then the starter shouldnt be getting fire.Originally Posted by lowchevytrucks8503
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
Not likely, unless the contacts are fried. Just swap them around.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
I swapped them around and no result
any ideas before I pull the starter?
Last edited by PunishedC10; 10-15-2009 at 04:02 PM.
2003 SIERRA- 5.3 DD
1985 SWB C10- slow, future plans- shaved, painted, 6.0/4l80e
I bought a new relay and switched it with all three and nothing happened.....
Next step is to pull the starter I guess
2003 SIERRA- 5.3 DD
1985 SWB C10- slow, future plans- shaved, painted, 6.0/4l80e
have you checked to see if the starter is getting power when you turn the key? i assume this is possible to check. gary
2005 SS AWD, 22" REPLICAS, VOLANT CAI, MAGNAFLOW EXH, 1/2 DROP- NEXT: TUNE, SHIFT KIT, SERVOS, TRU-COOL
(SOLD)2000 ECSB HARLEY DAVIDSON EDITION. 2''/4" DROP, 20" BUDNIKS, COWL HOOD, MOLDED ROLLPAN, CLEARS, DROP IN K&N, MIT, TAYLOR WIRES, LOUDMASTER EXHAUST
1991 RCSB S10 355 SBC, 700R4, 8.5" 10-BOLT, 18"/19" C6 Z06 WHEELS, 4"/5" DROP, MAGNAFLOW DUALS W/X-PIPE, FULLY SHAVED W/ CADDY LIGHTS: NEXT-LSX 370/PT88/TH350
sounds like a bad starter to me brushes proly burnt out in the starter itsself or a bad conection on the starter on the main hot wire from the bat
starter was bad fleabay starter ordered
2003 SIERRA- 5.3 DD
1985 SWB C10- slow, future plans- shaved, painted, 6.0/4l80e
Posting Permissions
Reply With Quote
