+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: i need an engine harness

Hybrid View

  1. #1
    Join Date
    May 2009
    Location
    hot & windy
    Posts
    1,117

    Exclamation i need an engine harness

    i know i'm looking for a needle in a haystack, but i really don't want to have to hack up a harness & pray it works.

    i need the engine wiring harness for a 99-02 GM 4.8 with a 5 speed manual transmission and manual 4x4 transfer case.

    any leads or suggestions will be a great help.

    thanks!
    00 FRC - just top end, exhaust, and a hot-air intake
    99 Sierra - 5.3 / 5spd
    ↓ click the pic for the build ↓

  2. #2
    Join Date
    Sep 2007
    Location
    SA, Texas
    Posts
    1,308
    We can rebuild your harness or we can build a new harness. Please PM me or call us. 210-626-0278
    Thanks
    mel-

    Her name is A Meli-
    "If everything is under control, you are going too slow."- MA

  3. #3
    Join Date
    May 2009
    Location
    hot & windy
    Posts
    1,117
    PM sent & still looking...
    00 FRC - just top end, exhaust, and a hot-air intake
    99 Sierra - 5.3 / 5spd
    ↓ click the pic for the build ↓

  4. #4
    Join Date
    May 2009
    Location
    hot & windy
    Posts
    1,117
    bump for today
    00 FRC - just top end, exhaust, and a hot-air intake
    99 Sierra - 5.3 / 5spd
    ↓ click the pic for the build ↓

  5. #5
    Join Date
    May 2009
    Location
    hot & windy
    Posts
    1,117
    bump for any possible leads
    00 FRC - just top end, exhaust, and a hot-air intake
    99 Sierra - 5.3 / 5spd
    ↓ click the pic for the build ↓

  6. #6
    Join Date
    Nov 2007
    Location
    GLENDALE,ARIZONA
    Posts
    213
    I have the harness from my 04 but not a 4x4

  7. #7
    Join Date
    May 2009
    Location
    hot & windy
    Posts
    1,117
    Quote Originally Posted by midnight04 View Post
    I have the harness from my 04 but not a 4x4
    so i found out the 4x4 don't make a difference because the only wire going to the transmission is the VSS signal, but the 04s have a different computer & add a plug for the DBW throttle

    thanks though!
    00 FRC - just top end, exhaust, and a hot-air intake
    99 Sierra - 5.3 / 5spd
    ↓ click the pic for the build ↓

  8. #8
    Join Date
    Dec 2008
    Location
    san antonio TX
    Posts
    1,365
    chances are your going to have to get one made from nelson performance. i know someone with an 01 2500hd 4l80e 2wd harness. if it helps any let me know.
    1982 c10 lsx swaped, NP tuned, true duals, 4:11s, trutrac, e-fans, CAI

  9. #9
    Join Date
    May 2009
    Location
    hot & windy
    Posts
    1,117
    Quote Originally Posted by lechez71 View Post
    chances are your going to have to get one made from nelson performance. i know someone with an 01 2500hd 4l80e 2wd harness. if it helps any let me know.
    i would still end up with an extra transmission controller plug to tie out of the way... which was the whole point of trying to find such an oddball harness. i'm a little OCD about stuff just hanging & looking like it don't belong there

    thanks anyway.
    00 FRC - just top end, exhaust, and a hot-air intake
    99 Sierra - 5.3 / 5spd
    ↓ click the pic for the build ↓

  10. #10
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Jeeze, remove it from the harness. if you can replace a harness you can cut wires out of one.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts