I am currently putting a 6.0/4l80 in a 90 rcsb truck and i can't get the tranny crossmember in to where it fits right.
I thought i had read somewhere that I just neeed to move the crossmember back to the back bolt holes. but it still isn't lining up.
Any help would be great.
drill new holes if you need to. Thats what I do.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
I was going to do that but I was worried about keeping it square in there.
I didn't know if it sat true center or if was farther off to one side than the other?
it won't be very far off center if it is at all measurable. We've all done it, guys with OBS trucks that are converted.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Posting Permissions
Reply With Quote