need part numbers for some locks (32 needed?) retainers (16 needed?)...
and valve seals... which ones?
need part numbers for some locks (32 needed?) retainers (16 needed?)...
and valve seals... which ones?
02 Chevy EcSb Z71, 5.3, Helix Tb Spacer, AEM Brute Froce Intake, Msd 8.5 wires, NGKTR55 IX, B&M 25k Trans Cooler, Hypertech 160, Nelson Tune, Nelson Harness & Ls1 fans, Fully Built tranny, tb2600, 216/224 551/551 115LSA, yeller z06 springs, magnaflow, cut-out, hi-flow cats, etc...
i got mine in a kit from texas speed.... check out the PRC kit they have.... i thinkit runs like 380
there are cheaper ones im sure, but im a firm believer you get what you pay for
sprayedenali: i like catching, but not fishingOriginally Posted by DamnYankee
lol...I wish you would never paint your truck...I bet it bugs them that much more that a primered up truck just soggied his Wheaties. good job buddy
DBTBSS: bring Tyler... we need someone to make fun of
MidnightRider: your right im gay
DamnYankee: my nana failed
DamnYankee: confused...if it can't keep up to begin with, how can it keep up
mitch cobb racing: ya, allen played with it for a while, HUGE difference
well i already have the yellow springs... i just need the retainers, locks, and valve seals...
02 Chevy EcSb Z71, 5.3, Helix Tb Spacer, AEM Brute Froce Intake, Msd 8.5 wires, NGKTR55 IX, B&M 25k Trans Cooler, Hypertech 160, Nelson Tune, Nelson Harness & Ls1 fans, Fully Built tranny, tb2600, 216/224 551/551 115LSA, yeller z06 springs, magnaflow, cut-out, hi-flow cats, etc...
https://www.patriot-performance.com/...ome.php?cat=51 check these guys out for locks and valve seals. they are good prices. Very good to deal with. I have the GM part number for the stock LS6 spring retainers around somewhere I'll see if I can find it.
00' RCLB 2wd 5.3 AT: Wheatley Tune, Comp 265H, 706's milled .025, Comp PR's, 918's, Efans, s&b CAI, AEM lt's, magnaflow, ASP UDP, circle d 3200, 4.30's currently down awaiting built lq4
https://www.patriot-performance.com/...&cat=51&page=1
so just get 16 of these? they will work for the intake and exh?
those ti retainers are pretty cheap... may have to get them as well...
02 Chevy EcSb Z71, 5.3, Helix Tb Spacer, AEM Brute Froce Intake, Msd 8.5 wires, NGKTR55 IX, B&M 25k Trans Cooler, Hypertech 160, Nelson Tune, Nelson Harness & Ls1 fans, Fully Built tranny, tb2600, 216/224 551/551 115LSA, yeller z06 springs, magnaflow, cut-out, hi-flow cats, etc...
Yup, those are the ones. Yes, you need 16 of them. Titanium retainers are a MUST if running PRC springs.
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
Posting Permissions
Reply With Quote
