Huge Garage Sale

[91_bowtie]

I've decided to move on to another project, so I'm selling my garage full of parts. Feel free to make reasonable offers. The motor and tranny are coming out in the next week or so. If you want pics of anything, just let me know.


2005 LQ9 6.0 block ~ 370ci
Diamond -14.9cc dish pistons, Mahle rings, ARP head studs, ARP main studs, ARP rod bolts, 317 heads surfaced & valve job, GM 6.0 head gaskets, Eagle offset h-beam rods, Polished stock crank, LS6 valley cover conversion, custom Comp cam (KeithMcCord design), comp 918 springs, comp 7.4" pushrods, comp retainers. This motor only has 7k miles and 6k of them are just cruising to and from work N/A. All machine work was done by Don Burlington from Raytown, MO. He's very well known for his great LSx builds. This motor was built to handle some abuse. $3200




Intercooled STS kit
I purchased this kit used, without a turbo. I then bought a Precision 76gts with a .81 a/r. One of the pipes was crushed when I received it. I will have a new one made for the buyer. $3000










2007 yukon 17" wheels... 400

[ducky]

damn I soooo could have used that snow performance kit. good price on the 65e. im assuming the intercooler from the sts fit your tahoe?

[91_bowtie]

damn I soooo could have used that snow performance kit. good price on the 65e. im assuming the intercooler from the sts fit your tahoe?

Sorry. It went to a local guy earlier today.

The kit is actually for a silverado. I just going to use the intecooler, wastegate, couplers, etc and fab a front mount with the gto manifolds.

[02CHEV]

is the 4l60e for 4wd or 2wd??

[91_bowtie]

is the 4l60e for 4wd or 2wd??

4wd

[02CHEV]

any thing wrong with it. cause i am not having any good luck with my trans

[ducky]

soo the intercooler would fit my truck? would u be willing to part it from the turbo?

[69chvelle]

Are the GTO exhaust manifolds and the LQ9 exhaust manifolds the same?Would you do $40 shipped for one set?

[91_bowtie]

sorry guys. I never got an email that there were replies to the thread.

duckysbht... yes it would fit. No. I won't part it out.

69chvelle... The manifolds are a little different in design. I paid 18 to ship the last set, so I'm not letting these go for anything less than 60 shipped. I have several sets of each design.

sambo... This motor wasn't built for N/A use. I never had it on a dyno without the blower. It's a low compression motor built with the intent of running boost and putting over 700 to the wheels. I was planning on running 15 psi with the 76gts front mount. I'll make you a hell of a deal on the motor & sts kit, with a set of manifolds. I was just planning on using the intercooler, wastegate, couplers, etc, and just parting the rest.

[Sambo]

sorry guys. I never got an email that there were replies to the thread.

duckysbht... yes it would fit. No. I won't part it out.

69chvelle... The manifolds are a little different in design. I paid 18 to ship the last set, so I'm not letting these go for anything less than 60 shipped. I have several sets of each design.

sambo... This motor wasn't built for N/A use. I never had it on a dyno without the blower. It's a low compression motor built with the intent of running boost and putting over 700 to the wheels. I was planning on running 15 psi with the 76gts front mount. I'll make you a hell of a deal on the motor & sts kit, with a set of manifolds. I was just planning on using the intercooler, wastegate, couplers, etc, and just parting the rest.

Gotcha, 700 to the wheels would be I thought about the sts kit, but I would rather have a front mount, I could sell my Radix and 6.0 and still probably not be too bad off. Is that price on the motor firm? Your located in kanas right? I'm working up in colorado right now and kansas is right next door. Shoot me a pm and we can talk about this.