I'm currently working on installing E-fans and a radiator from an 05, but there's no spot on the radiator for the line to the throttle body.
Just wondering what I should do with it. I'm guessing the solution's going to be bypassing the TB on the opposite side.
-Matt
He who dies with the most toys wins.
(Still On)Summer-00 4.8 Silvy (Slow...Needs Bottle)
(Still Off)Winter-94 FS Blazer (Almost ready)
Pulls out friends- 93 1500 4.3 W/T Special
Can't believe that there is not hole for the vent line. My 93 rad did not have a place for the steam line either so I tapped the water pump right next to the coolant lines for the heater core. See bottom right corner in pic.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Thanks Red, took your idea into consideration.
Rad is from a 4.3 truck, so no vent line I guess.
It would be fine to just T it into the line from the radiator to the overflow/reservoir, correct?
-Matt
He who dies with the most toys wins.
(Still On)Summer-00 4.8 Silvy (Slow...Needs Bottle)
(Still Off)Winter-94 FS Blazer (Almost ready)
Pulls out friends- 93 1500 4.3 W/T Special
Posting Permissions
Reply With Quote