+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: SNAPED MY TIE ROD

  1. #1
    Join Date
    May 2006
    Location
    Bakersfield,CA
    Posts
    113
    i snaped my tie rod yesterday while i was hunting in the mountains i was about 2 hours from any one and had to clime to the top of the highest mountain to get reception i called my friend "dirty BOB" who brought his welder up and fixed it here are some pics when i got it home the alignment is a little off :crazy: :guns: I WILL POST SOME BETTER PICS LATER


    2006 1500HD Intake and HPtune,Cognito Steering kit, comp 218/224 cam
    1994 chevy P/U 1500 Sportside 330 H.O. Crate 4.11 Eaton posi. 150 Wet Nitrous Holly kit w/t external full cell
    E.T. 14.2@102mph on (20's)

    http://i15.photobucket.com/albums/a3...ure200X600.gif
    1994 chevy
    http://vids.myspace.com/index.cfm?fuseacti...eoid=1435245725

    2006 1500HD
    http://vids.myspace.com/index.cfm?fuseacti...eoid=1135635224

  2. #2
    Join Date
    Apr 2005
    Posts
    4,229
    Damn! What did you hit?
    Gone, but not forgotten!

  3. #3
    Join Date
    May 2006
    Location
    Bakersfield,CA
    Posts
    113
    <div class='quotetop'>QUOTE(SCIV &#064; Nov 25 2006, 02&#58;12 PM) [snapback]74536[/snapback]</div>
    Damn&#33; What did you hit?
    [/b]
    i hot a little ditch kind of like a pot hole bit my truck is hevy enough to rip the weel out of my hand and snap to the right
    2006 1500HD Intake and HPtune,Cognito Steering kit, comp 218/224 cam
    1994 chevy P/U 1500 Sportside 330 H.O. Crate 4.11 Eaton posi. 150 Wet Nitrous Holly kit w/t external full cell
    E.T. 14.2@102mph on (20&#39;s)

    http://i15.photobucket.com/albums/a3...ure200X600.gif
    1994 chevy
    http://vids.myspace.com/index.cfm?fuseacti...eoid=1435245725

    2006 1500HD
    http://vids.myspace.com/index.cfm?fuseacti...eoid=1135635224

  4. #4
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Damn, that bites. At least you got it fixed and on the road again. Time for a new tie rod and inspect the steering box for damage. That must have been one nasty bump.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  5. #5
    Join Date
    Mar 2006
    Location
    Dawson Springs KY
    Posts
    284
    Nice work in doing what had to be done to get it home. I&#39;ve seen that happen to a Hummer before. Your right about the weight of the vehicle being too much for the tie rods.

    2011 Silverado LT 5.3 bone stock (for now)

    (gone but not forgotten)02 Avalanche Z-71 Vortech supercharged 3.12 pulley 10psi, SMC meth injection, 33 12.50-17 procomp AT, 17x9 procomp wheels, AVIC-N2 NAV, 4.56 gears, Detroit TrueTrac, 2500 stall converter, transgo HD2 shift kit, Vette servos, 80mm BBK throttle body, Edelbrock shortie headers Cold Fusion wet shot (60hp), and too many more mods to list. 8.86/18th 472rwhp/499rwtq

  6. #6
    Join Date
    May 2006
    Location
    Bakersfield,CA
    Posts
    113
    <div class='quotetop'>QUOTE(KY_BOB &#064; Nov 25 2006, 02&#58;40 PM) [snapback]74539[/snapback]</div>
    Nice work in doing what had to be done to get it home. I&#39;ve seen that happen to a Hummer before. Your right about the weight of the vehicle being too much for the tie rods.
    [/b]
    ya it really sucks when you are so far up in the mountains that you onstar wont even work and when you are on a hill and have to try and get your truck down when one tire doesnt want to face the direction you want to go plus it got down to 20F when we first got there it was 60F so I was dressed for that i got broke it around 1:00 and got out or got moving againe around 10:00. i had to call all of my friends and try to finde one of them that had a welder that they could bring up there i fianly go ahold of my friend "dirty Bob" and he came up and welded itup in pitch dark in 20F weather. we also had to get the truck off the hill it was about 75 yards on a 45 degree slope and we had to turn it around and take it down the hill all with the passanger tire not wanting to go the direction we are it sucked it took us about 2 hrs to inch it down the hill. i am going to upgrade it with the
    cognito mororsports Heavy Duty Tie Rod Steering Kit
    http://cognitomotorsports.com/store/...es/tie-rod-kit
    2006 1500HD Intake and HPtune,Cognito Steering kit, comp 218/224 cam
    1994 chevy P/U 1500 Sportside 330 H.O. Crate 4.11 Eaton posi. 150 Wet Nitrous Holly kit w/t external full cell
    E.T. 14.2@102mph on (20&#39;s)

    http://i15.photobucket.com/albums/a3...ure200X600.gif
    1994 chevy
    http://vids.myspace.com/index.cfm?fuseacti...eoid=1435245725

    2006 1500HD
    http://vids.myspace.com/index.cfm?fuseacti...eoid=1135635224

  7. #7
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    This time of year it is best to have some blankets and stuffed packed in your vehicle for such emergencies. They&#39;ve saved my butt many times and also kept me warm on cold track nights. Good friends that would come all that ways to your rescue are hard to find. Sounds like somebody needs a good bottle of whiskey bought for him.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  8. #8
    Join Date
    May 2006
    Location
    Bakersfield,CA
    Posts
    113
    <div class='quotetop'>QUOTE(RedHeartbeat &#064; Nov 25 2006, 04&#58;36 PM) [snapback]74547[/snapback]</div>
    This time of year it is best to have some blankets and stuffed packed in your vehicle for such emergencies. They&#39;ve saved my butt many times and also kept me warm on cold track nights. Good friends that would come all that ways to your rescue are hard to find. Sounds like somebody needs a good bottle of whiskey bought for him.
    [/b]
    I took my friend to dinner and gave him &#036;200.00 wich he wouldnt take
    2006 1500HD Intake and HPtune,Cognito Steering kit, comp 218/224 cam
    1994 chevy P/U 1500 Sportside 330 H.O. Crate 4.11 Eaton posi. 150 Wet Nitrous Holly kit w/t external full cell
    E.T. 14.2@102mph on (20&#39;s)

    http://i15.photobucket.com/albums/a3...ure200X600.gif
    1994 chevy
    http://vids.myspace.com/index.cfm?fuseacti...eoid=1435245725

    2006 1500HD
    http://vids.myspace.com/index.cfm?fuseacti...eoid=1135635224

  9. #9
    Join Date
    Feb 2004
    Location
    Western, KY
    Posts
    433
    i&#39;ve got a few friends like that will come and help you if they were on their death bed. "Dirty Bob" is a true friend dude. Need to have more pplz like that in the world. "dirty bob"
    Mods:
    Maybe STOCK
    "My lugnuts require more torque than your ricer is ever going to produce"
    Sleep: That Stuff Is Overrated
    "You don't care what it is, or who makes it, as long as they race it. You my friend are a true Gear Head!" (Drew Anderson)
    Who's the real culprit of Obeisity: video games because their scared of physical activities, or Pillsbury for being so delicious?

  10. #10
    Join Date
    Aug 2006
    Location
    LaCrosse, WI
    Posts
    106
    <div class='quotetop'>QUOTE(ULuze2 &#064; Nov 27 2006, 10&#58;22 PM) [snapback]74753[/snapback]</div>
    i&#39;ve got a few friends like that will come and help you if they were on their death bed. "Dirty Bob" is a true friend dude. Need to have more pplz like that in the world. "dirty bob"
    [/b]
    yes sir
    '82 C-10......project truck.....

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts