Parting out an 06 4.8

[C-WAY]

All parts have 36k Miles on them and is off my 06 GMC. If the items look nasty in the pics is because I havent cleaned them up yet. Ill clean up before shipping.

Heres an everything pic. I worked my tail off unbolting all this stuff! It was a fun learning process though!



- Alternator 145 AMP I believe - SOLD


- Throttle Body DBW - SOLD


- Valve Covers - 30$ Shipped w/ Oil cap


- Truck Intake Manifold Complete -SOLD


- Water Pump - 30$ shipped

Heads- SOLD





- Front cover - 20$ shipped


- Power Steering Pump (Heavy) - SOLD


- A/C Compressor Unit - SALE PENDING


- Crank Pulley off 07 5.3 w/ 40k - 35$ Shipped


- Starter for the 07 5.3 -SOLD


- Lifters w/ Lifter cups from my 06 4.8 - 30$ Shipped


I do have the flexplate and rear covers still on the motor left to take off but I was too lazy, Ill post them up tommorow or something.
I think thats all, If Im missing anything let me know lol. I dont have the coil packs or dist. Caps or any of that cause I used it with the 5.3.
I also have a stock 06 4.8 and a stock 07 5.3 Cam and 2 Sets of Stock Valve Springs. Each Cam and Set of valve Springs is 20$ Shipped. The 06 4.8 cam has 33k Miles on it and the 07 5.3 I believe has 40k.
- JUST ADDED - 2 Sets of Stock Pushrods - 20$ Shipped for each set.

Im Located in College Station TX. You can Pick these items up from me and I will deduct shipping or I can Ship these out the instant I recieve paypal payment! My Paypal is jl_atv_raptor@hotmail.com

[11 6.2]

If I can sell my rims I might be intrested in the cam.

[C-WAY]

Just lemme know man, Im gettin pics tommorow of all this so everyone can see before they pay me.

Just to let you all know the 4.8 is being parted out because of a spun rod bearing. As far as I know the Heads and cam were NOT Damaged at all. And obviously the accessories are on the outside of the engine so they are fine.

I doubt Ill sell the oil pan because of the spun bearing issue.

[ducky]

if it didnt have such a low lsa id jump on that

[CHEVROLADE]

bump

[C-WAY]

Yeah it was pretty lopey for the 4.8 it sounded like a beast lol. I like my new 114 Better though

[02CHEV]

what else would u need with the cam besides springs

[C-WAY]

Thats all I ran with the cam was the LS6 springs. Id buy some pushrods to be extra safe.

Dont the 862s flow the same at the 706 heads? If someone were to use the heads on the camswap to save time of changing springs of course...

[02CHEV]

i might just pay u to night. i just blew 1200.00 on my damn cat. y not 75.00 for a cam

[C-WAY]

i might just pay u to night. i just blew 1200.00 on my damn cat. y not 75.00 for a cam

Dogs Rule

You should buy the heads too, that way you wont have to change springs lol. LS6 Springs are usually around 50$ and these come with rockers and rocker arms too! If you buy both it will save you some shipping maybe too. That is if the heads are the same and will work on your 5.3