super quick wiring question

[r6z4o6]

Help me verify injector wire colors on 2001 5.3. I am modifying factory harness, and unfortunately i got myself confused and I might be putting the driver's side injectors in wrong places...

Assuming cylinder #1 is on drivers side at the very front of the engine, these are the NON-PINK wires as i read from service manual....

DK BLUE/WHITE = 8 |-----| 7 = RED/BLk
..........YEL/BLK = 6 |.......| 5 = BLK/WHT
......LT BLU/BLK = 4 |.......| 3 = PNK/BLK
.....LT GRN/BLK = 2 |-----| 1 = BLK
..............................front

Right now I have black on #7 and red/blk on #1....can someone look under their hood and verify the NON-PINK injector wires on drivers side?? I have factory service manual however i have really gotten myself mixed up..

Thanks!!

[NITROUS]

They are just like you have them layed out starting with black on cylinder #1 Red and black should be on #7

[r6z4o6]

YES!! I totally did them backwards!! Time to buy some more heat shrink thanks!

[RedHeartbeat]

1 - black
2 - lt green/black
3 - pink/black
4 - lt blue/black
5 - black/white
6 - yellow/black
7 - red/black
8 - dk blue/white

sorry, had the wrong ones up there at first

Damn, I'm slow. Took too long grabbing a cold beer on the way back.

[NITROUS]

Greg, I think our old age is starting to show!