+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16

Thread: SS Bumper Cover or Painted Bumper Cap - Pics Indside

  1. #1
    Join Date
    May 2008
    Location
    Austin, TX
    Posts
    91

    SS Bumper Cover or Painted Bumper Cap - Pics Inside

    I'm trying to make my decision on whether I should get a paintable bumper cap or if I should go ahead and paint and install my SS bumper. I bought it thinking I wanted it, then changed my mind thinking I wanted more of a stock look with a few touches. (i.e. 22's, Escalade door handles, clear corners, stereo, etc.) I've now gone to the point where I am having the roof rack shaved, running boards, rear bumper and D pillars color matched and I just bought a 2/3 lowering kit last week. Needless to say, I now have another full scale project on my hands.
    I've gone back and forth on this and thought I decided on the paint to match bumper cap, until I saw this picture, and now I'm having second thoughts.



    I'm a bit concerned that if I put the SS bumper on that I'll destroy my paint on it since it's my DD. I also sorta like the look of the mostly chrome front because I feel like it sets of the chrome rims and door handles I have it it. If I do it, it will most likely look something like this. It's close to the same color as mine.



    What do you guys think? I'd be keeping the factory chrome grille with my speed grille and billet bowtie in it with either choice. I'd also be installing the speed grills in the SS bumper if I put it on. Need some advice here!
    Last edited by Big Tap; 07-25-2008 at 10:31 AM.
    '89 RC Step-Side - 383 Stroker, Belltech 2/4 drop, Escalade Nose

    '02 Tahoe - 22' Rims and a Custom A/V System

  2. #2
    Join Date
    Jul 2008
    Posts
    8
    I for one love the way the SS bumper looks i used to have the caps color matched but i just still needed the SS bumper.

    2004 Chevy RCSB 4.8, comp 212/218 w/supporting PRs and springs, JBA ti coated shorties, CAI, Loud exhuast, ASP Underdrive pully, LS1 fans w/harness, Built 60E, Eaton LSD, Tune by 12secSS, Baer Alumisport all 4 corners, Hotchkis swaybars front & rear, Nitrous Outlet truck plate, twin 15lb bottles, Trick Performance controller, 860 heaters and NX bottle openers. Still to come a stall converter someday.

  3. #3
    Join Date
    May 2008
    Location
    Austin, TX
    Posts
    91
    This is the picture that is making me lean more towards using the SS bumper.

    '89 RC Step-Side - 383 Stroker, Belltech 2/4 drop, Escalade Nose

    '02 Tahoe - 22' Rims and a Custom A/V System

  4. #4
    Join Date
    Aug 2005
    Location
    St. Anthony, Indiana
    Posts
    1,592
    SS bumper.

  5. #5
    Join Date
    Jul 2008
    Posts
    8
    I think with chrome speed grill inserts you cant go wrong with the SS bumper

    2004 Chevy RCSB 4.8, comp 212/218 w/supporting PRs and springs, JBA ti coated shorties, CAI, Loud exhuast, ASP Underdrive pully, LS1 fans w/harness, Built 60E, Eaton LSD, Tune by 12secSS, Baer Alumisport all 4 corners, Hotchkis swaybars front & rear, Nitrous Outlet truck plate, twin 15lb bottles, Trick Performance controller, 860 heaters and NX bottle openers. Still to come a stall converter someday.

  6. #6
    Join Date
    May 2008
    Location
    Austin, TX
    Posts
    91
    I agree, that does look nice. I think if I do it, I'm going to steal this guys idea and install the fog lights from something like an '04 or '05 truck and run HID's.
    '89 RC Step-Side - 383 Stroker, Belltech 2/4 drop, Escalade Nose

    '02 Tahoe - 22' Rims and a Custom A/V System

  7. #7
    Join Date
    Nov 2007
    Location
    S.A. Texas
    Posts
    3,751
    SS bumper and 5 coats of clear FTW
    Name: Mark,
    God created turbo lag so nitrous trucks could have a chance.


    http://www.ls1truck.com/forums/my-ga...tml#post274877

  8. #8
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    use the ceramiclear over the bumper to make it tough.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  9. #9
    Join Date
    May 2008
    Location
    Austin, TX
    Posts
    91
    Yeah, the more I think about it, the more I think I'm just going with the SS bumper. I already have it in my garage and if I wanted to do the painted cap, I'd need to go buy one. Not to mention that it looks tough.
    '89 RC Step-Side - 383 Stroker, Belltech 2/4 drop, Escalade Nose

    '02 Tahoe - 22' Rims and a Custom A/V System

  10. #10
    MidnightRider Guest
    Quote Originally Posted by RedHeartbeat View Post
    use the ceramiclear over the bumper to make it tough.
    this is a must on the urathane bumper cover or you WILL get alot of rock chips. Mine is in great need of eing redone

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts