I am installing a 5.3 and a 4L60 combo into a 79 Jeep DJ5. I have modded the tube to look like a CJ5. I have also installed a three link on the rear with a watts link. Anyway I need to know what size the trans to block bolts are. Any help would be appreciated.
Metric 10mm x 1.5 pitch thread 40mm long, minimum thread length of 26mm.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Thanks. I will pick some up in the morning. All I have left to get is a 99-02 wiring harness and a alternator bracket.
Awesome--if that is all you have left, you are in GREAT shape. Good call on the rear suspension setup!
Good luck with the build--and ask as many questions as you want...
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
Posting Permissions
Reply With Quote
