+ Reply to Thread
Results 1 to 7 of 7

Thread: junk or not??

  1. #1
    Join Date
    Mar 2006
    Posts
    263

    junk or not??

    I have the original 4.8 out of my silverado.....I believe the heads are an 862 casting......are these junk like I been told......on mortec, it says they are for 4.8 or 5.3....so are they the same as the 5.3 heads? I have several ls1's at the house, one of these days when I have the heads off one of them, will it be good to make the swap....I was told that the 4.8 heads were junk, just want some verification....I thought the 5.3 heads were exactly the same except they had smaller combustion chambers....that is what i need since I run N/A on everything.

  2. #2
    Join Date
    Feb 2008
    Location
    Gainesville, Fl
    Posts
    212
    Yes the 4.8 heads are EXCATLY the same as the 5.3 heads. They both have 61.5 cc combustion chambers.
    04 Silverado RCSB
    02 LS1 Shortblock(Stock)
    LS6 CAM - 204/219 .551/.548 117.5
    243 Heads w/ Light Weight Valves
    Exhast- LT Pacesetters w/ory, 3" Straight pipe
    Suspension- DJM 4/6, Doetsch Shocks, Caltracs
    Need a ported DBW TB > http://www.ls1truck.com/forums/sale-...ale-trade.html

  3. #3
    Join Date
    Mar 2006
    Location
    Phoenix, AZ
    Posts
    620
    Lots of LS1/LS2 guys will use the 5.3 heads to bump up compression. They aren't junk....used stock ones usually go for about $100 from what I've seen.


    2006 GTO M6 Brazen Orange
    2006 Silverado CCSB Duramax


  4. #4
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Don't they have smaller valves?
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  5. #5
    Join Date
    Mar 2006
    Location
    Phoenix, AZ
    Posts
    620
    I'm not sure...all I know is that I have gotten a couple of requests from the GTO guys to try to find 5.3 heads, and put together one cross-forum deal for a guy from pt.net to sell his 5.3 heads to a guy from ls1gto.com.


    2006 GTO M6 Brazen Orange
    2006 Silverado CCSB Duramax


  6. #6
    Join Date
    Feb 2008
    Location
    Gainesville, Fl
    Posts
    212
    5.3 Heads
    Intake Valve 1.89"
    Exhaust Valve 1.55"

    ls1/ls2
    Intake Valve 2.00"
    Exhaust Valve 1.55"

    That info was taken from smokemup.com
    04 Silverado RCSB
    02 LS1 Shortblock(Stock)
    LS6 CAM - 204/219 .551/.548 117.5
    243 Heads w/ Light Weight Valves
    Exhast- LT Pacesetters w/ory, 3" Straight pipe
    Suspension- DJM 4/6, Doetsch Shocks, Caltracs
    Need a ported DBW TB > http://www.ls1truck.com/forums/sale-...ale-trade.html

  7. #7
    Join Date
    Oct 2007
    Posts
    170
    yup thats it.. bring em down .020 you got you some 58cc's...
    02 Sierra... motorless for now.
    02 SS.. stock bottom 4.8, 241's, 224-220/116+4, 918's and pushrods, front mount turbonetics 78mm, HKS GTII, TiAL, eBoost2, Yank PT3600, Performabuilt 60e, solid motor mounts. Tuned by me with HP Pro and LM2/AFX

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts