FYI Vette Servo

[NITROUS]

I pulled my 2002 4L60E tranny servo out and took it to the chevy dealership where my bud works. We started looking up the part # for a 2002 and up vette servo and found that all the way up to 2006, cars and trucks with a 4L60E pretty much use the same part number. So if you're thinking of putting a vette servo in your truck and it's newer than 2002, you might already have that servo in your tranny. Thought you guys would be interested in this info. Feel free to comment if you found different. Like I said this is info only.

[vortec350]

I have heard that from somewhere else but not sure where.I just ordered one for our new tahoe,we will find out in the next week and will start a new thread if it is the vette servo that comes in.
Thanks for the info man

[RedHeartbeat]

Yeah, my Corvette servo is laying in a box on the shelf since I put the full billet servos in.

[farmtruc]

Good info!
I'll be installing the Sonnax servo setup in the Av with a shift kit from FLTrans! It's supposed to be the best out, I'll keep you updated.
It's a bit more, but Chuck says it's awesome!

later,

allen

[Zick]

My 03' did not have the vette servo when I pulled it out. It was definatly different.

[jethro_3]

My 'o5 with the 4L65E did not have the Vette servos....

[RedHeartbeat]

I guess it must be the F-body transmission that got the vette servos. My 98 had one. My 2002 cargo van transmission had one, also. I don't know why they didn't put them in the truck transmissions.

[NITROUS]

I guess they just put them in certain NBS trucks. The Cheverolet parts dept. said the trucks could have either one in the 4L60/65E tranny's. My 97 4L60E didn't have one.

[Tim Z]

<div class='quotetop'>QUOTE(RedHeartbeat &#064; Feb 28 2006, 12&#58;12 AM) [snapback]45586[/snapback]</div>

Yeah, my Corvette servo is laying in a box on the shelf since I put the full billet servos in.
[/b]

[vortec350]

My 97 did not either,I have a billet though and it is nice.