+ Reply to Thread
Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 31

Thread: tranny no workie!!!

  1. #1
    Join Date
    Jun 2004
    Location
    george west texas
    Posts
    3,694
    turned on the hiway and got on it....soon as the 1-2 shift BAM!!!!rattled the whole damn truck i was like WTF!!! abs light came on..brake light came on...speedo went to 0...it was free spinning and then it grabbed so i contunued on about 4 miles and stopped at a resturant...put into reverse and sounded like splines not connected...put in drive and went forward...put back in reverse and same sound...pushed it back into parking space...went to eat...came out and started up...put into drive and no movment either way....what happened????
    '13 silverado LT...stock

    '11 lt 4x4 z71..tvs1900

    '01 gmc twins 6.0 jakes 400 ladder bars w/ coilovers tuned by nelson performance

  2. #2
    <div class='quotetop'>QUOTE(bud8fan &#064; Feb 27 2006, 02&#58;02 PM) [snapback]45522[/snapback]</div>
    turned on the hiway and got on it....soon as the 1-2 shift BAM&#33;&#33;&#33;&#33;rattled the whole damn truck i was like WTF&#33;&#33;&#33; abs light came on..brake light came on...speedo went to 0...it was free spinning and then it grabbed so i contunued on about 4 miles and stopped at a resturant...put into reverse and sounded like splines not connected...put in drive and went forward...put back in reverse and same sound...pushed it back into parking space...went to eat...came out and started up...put into drive and no movment either way....what happened????
    [/b]
    Damn, second week in a row someone I know with a Radix took out a tranny. Makes me want to start building mine right now.... Bad luck there Bud. Hope you get it back on the road soon.......
    2004 Nekkid Z71 Avalanche with increased traction, enhance aerodynamics, and upgraded airflow.....

  3. #3
    Join Date
    Feb 2005
    Posts
    131
    Stock trans, or was that built?
    New Truck on it&#39;s way: &#39;07 Classic GMC 2500HD DuraMax LBZ

    03&#39; Silverado ECSB 4x4 Z71 LQ9, TR230, Patriot LS6, 31lbs, Trailblazer stall, Corvette servo, Corsa Touring,
    HP Tuners


    SOLD - 99&#39; Silverado ECSB 4x4 5.3, Edelbrock RPM, Nitto Terra Grapplers, Texas-Speed Tuned 02&#39; PCM, LT1 fans

  4. #4
    Join Date
    Apr 2005
    Location
    belton, tx
    Posts
    747
    makes me feel better about my bad luck. now it&#39;s bud gettin&#39; hit in the face w/ a dick

    (some of you will remember the comment he made about my luck last week)

    quote: damn dude what luck you have...it could be raining pussys outside and you look up and a 12" dick would hit you right between tha eyes
    2013 2wd Z71 6.2 crew cab

    Old Truck: '04 Chevy crew cab stroked/bored 6.0 to 408ci. forged internals, patriot 68cc stage 3 heads (11.1:1cr), comp 244/246 .600 115lsa cam, 3000 yank tc, built 4L60E, walbro 255, 60# mototron injectors, pacesetter lt's 4" single no-cat exhaust

    best time 12.93 1/4 mi @ 103 in the turbo truck.

    1968 Camaro Convertible, super sweet!

  5. #5
    Join Date
    Dec 2003
    Location
    Newark, Tx.
    Posts
    1,303
    I&#39;d say you broke the shell and then some.
    Good luck Alton.
    '92 GMC reg. cab, step side. 7.32@ 92.3. SOLD
    http://videos.streetfire.net/video/d...d700c6401f.htm
    New project: '00 S-10 ext. cab, ZQ8, 370, T-56, daily driver.

  6. #6
    Join Date
    Nov 2005
    Location
    ohio
    Posts
    1,712
    ouch&#33; well, atleast you can have it beefed while its out, still sucks though, could it maybe be the 1-2 clutches slipped bad?
    07 SILVERADO CLASSIC 2500 HD 4x4 CREW CAB LT3 DURAMAX LBZ/ALLISON 6 SPEED 5'' MBRP Turbo back exhaust 6'' TIP /NO CAT- NO MUFF/ AFE Intake/ EDGE HOT JUICE /MERCHANT AUTO STG III Built Allison/P I ConverterTTS Twin Lift Pumps. Tierod sleeves/Cognito braces.17x9 Moto metals_______ Old Truck ,04 Z-71/Turbocharged,/cam/stall/Zippy Built TRANS/Nelson Tuned------

  7. #7
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Damn, we&#39;re having a rash of bad transmission luck around here lately&#33;
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  8. #8
    Join Date
    Apr 2005
    Location
    belton, tx
    Posts
    747
    Wasn&#39;t that a "built" trans by JAG? Any warranties?
    2013 2wd Z71 6.2 crew cab

    Old Truck: '04 Chevy crew cab stroked/bored 6.0 to 408ci. forged internals, patriot 68cc stage 3 heads (11.1:1cr), comp 244/246 .600 115lsa cam, 3000 yank tc, built 4L60E, walbro 255, 60# mototron injectors, pacesetter lt's 4" single no-cat exhaust

    best time 12.93 1/4 mi @ 103 in the turbo truck.

    1968 Camaro Convertible, super sweet!

  9. #9
    Join Date
    Mar 2003
    Location
    San Marcos Texas
    Posts
    4,393
    <div class='quotetop'>QUOTE(trtturbo &#064; Feb 27 2006, 03&#58;27 PM) [snapback]45529[/snapback]</div>
    I&#39;d say you broke the shell and then some.
    Good luck Alton.
    [/b]
    That is what I was thinking. That exact thing happened to one of our company vans.
    2006 Superior Blue Trailblazer SS AWD, Stock as a rock

    Sold: 2002 GMC Sportside Denali front end with a 2002 LS1, FLT level 5, Yank 2600, Trick Turbo, T76, Nelson intercooler, 60LB injectors, Warbro fuel pump, Eaton locker, Magnaflow, 3.42, Nelson Performance Tuning (speed density).

    Sold: 1981 GMC LB RC 1500 2002 4.8L 4L60E 12 bolt 3.73 Richmond Lock Right AC PS Nelson Performance tuning

  10. #10
    Join Date
    Jun 2004
    Location
    george west texas
    Posts
    3,694
    not built...i just had him put in servos,zinc seperator plate,shift kit,acc pistons...did not go into the tranny...i&#39;ll get it rebuilt with all the hard parts down here thou....
    cant beleive how violent the BAM was this tranny never slipped not 1 bit...
    '13 silverado LT...stock

    '11 lt 4x4 z71..tvs1900

    '01 gmc twins 6.0 jakes 400 ladder bars w/ coilovers tuned by nelson performance

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts