Harness connectors

[Wagonbacker9]

Looking for the following connectors from a 99-02 (or compatible.. not sure) engine harness. I was told the harness I bought was uncut.. apparently this was not the case.

MAF sensor
Crank Angle Sensor
1 Injector harness (prefer with pigtail to splice please)
Park/neutral safety

I can use an IAT breakout and a MAP relocate harness if I have to, and I think I could bypass the safety switch, obviously injector connectors can be found anywhere, so the primary worry is the crank angle sensor connector.

Thanks.

[ecld_07]

Think racetronix will have most of those connectors.

[cottontop11]

Efi connection will have them as well

[chvy=power]

I have a harness with everything but the injector pig tails on it. Pm me if you need some connectors off of it. Harness came from a 2003 5.3

[Wagonbacker9]

Racetronix's site SUCKS... found everything but the injector pigtail on the other site (neither carries the truck parts apparently)

Anyone have any idea which gear selector connector I need?

[ecld_07]

Racetronix's site SUCKS... found everything but the injector pigtail (neither carries the truck parts apparently)

Anyone have any idea which gear selector connector I need?

Yes it's a joke. I email em what I'm looking for and they send me the links to the parts I asked for....iv got pigtails off fuelinjectorclinic.com too

[Wagonbacker9]

Yes it's a joke. I email em what I'm looking for and they send me the links to the parts I asked for....iv got pigtails off fuelinjectorclinic.com too

Not going to worry too much about the injector connection until I know for sure what injectors I'm using. Its all together possible that I'll just switch over to EV1 or EV6's, so no real point in sweating that one.

[farmtruc]

send jon or erica (@nelsonperformance.com) an email, we have all the connectors here.
we can leave them unassembled if you want, or send pigtails.