what is the best thing to use on the o-ring while installing injectors.
what is the best thing to use on the o-ring while installing injectors.
2000 GMC Sierra
6" pro comp suspension
3" body lift
2.5" truxx leveling kit
37" micky thompson mtz
pacesetter long tubes-offroad y-pipe-no cats-morroso muffler-MSD coils and wires-flex a lite fans-air aid intake-diablo tune
Not sure if it is "the best" but I use vaseline on the orings. Never had one go bad.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Good choice.Originally Posted by RedHeartbeat
If not I've never had a single problem with just motor oil...my flavor is Castrol 20w50 for that kinda stuff. Shoudn't ever have to use a lot of force.
i have always used silicone paste, which is about the same as the above mentioned vaseline
2006 Trailblazer SS RWD
actually silicone could be a bad idea unless it petroleum based
Name: Mark,
God created turbo lag so nitrous trucks could have a chance.
http://www.ls1truck.com/forums/my-ga...tml#post274877
I use Strawberry Flavord Lube......Wait what are we doing again?
2000 Silverado ECSB- 5.3 CAI, Pacesetter LTs, ORY- Pipe, Magnaflow XL, E-fan, Ported T/B , Nelson Tuned, Built 4l60e, Circle D Stall, 3.42s G80, 2-4 Drop, Hertz Highs, Rockford 501s
2004 Buell XB12s
thanks for all the help guys
2000 GMC Sierra
6" pro comp suspension
3" body lift
2.5" truxx leveling kit
37" micky thompson mtz
pacesetter long tubes-offroad y-pipe-no cats-morroso muffler-MSD coils and wires-flex a lite fans-air aid intake-diablo tune
i would have to look, but i think it is
Posting Permissions
Reply With Quote
