Alright guys I got my exhaust welded on the truck yesterday, and I had a massive leak coming from the drivers side collector. I went and bought a new metal o ring gasket, its better but still leaking when you give the truck gas, will the red rtv fix the problem or will it stand up to the temp. please help, thanx Nick
Master power t-76 kbracing, Intercooled, 11psi, tr220 cam, patriot dual springs, 72lbrs, snow meth, walbro, efans, 80e, tansgo, yank 3200.
buy a vband clamp and have it welded in there instead of the flat gasket.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
any other suggestions other than that, dont really feel like taking off manifold and crossover pipe to have it welded, do you think the rtv will work ??
did you check to see if the mating surfaces were flat? One of them must be warped for it to be leaking. Try some copper RTV, it might help. Put it on the surface and let it set overnight before tightening.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Posting Permissions
Reply With Quote