I want to order a wide band and a few others. Anyone using this Gauge http://tunertools.com/proddetail.asp...PLX-DM6-SMAFR2
If so how do you like it?
Printable View
I want to order a wide band and a few others. Anyone using this Gauge http://tunertools.com/proddetail.asp...PLX-DM6-SMAFR2
If so how do you like it?
I have one and it works.. I would just make sure you can adapt it to work with your tuning software if you tune your own truck. If all your doing is monitoring afr it works great. I had an lm-1 in the tail pipe and the plx in the downpipe and they read the same on the dyno.
i got one .its badass,and well worth the 200
http://i244.photobucket.com/albums/g...olade1/plx.jpg
i use it and i luv it ;)
X2 mine was point for point with a 1000+ unit on a mustang dyno..Quote:
Originally Posted by skeet
Mine is bad to the bone, I love it.
I just want to adapt the oil pressure one to read fuel pressure.....I hope it works. !!!
did y'all mount the sensor as recommended by PLX, on top of the pipe and top of the sensor pointed 15 degrees forward? I dont have room for that unless I go way back behind the cab. Also, who is datalogging with HPTUNERS with the PLX? They only have one wire for the datalog output and HPTUNERS requires two wires to the box.
The second wire is a ground. Ground it to body should work fine.
you would think that if it were that easy that the HPTUNERS box would have that built in? :nutz:
I ran my ground to the unit. I mounted my WB in the factory 02 sensor hole on my pacesetter lts, and had a bung welded on the side @ 3 o'clock for o2 sensor. Done this so I wouldn't have to worry about it getting broke off.
They could sort of build it in. however you dont want the laptop being your ground nor the PCM so you have the option of wiring your own this way. Also some widebands will have a ground output that they want you to use for there sensor.
Yeah my FAST dual wideband gauge has both signal and ground wire leads.
I wonder if you can use an Autometer gauge hooked up to the PLX?Quote:
Originally Posted by 2boosted
from the plx website...
The PLX Oil Pressure Sensor Module accurately measures the the pressure of oil. This is ideal for oil pressure monitoring. Up to 32 Sensor Modules can be daisy chained together in the iMFD system. The Oil Pressure Sensor Module can also be used as a stand alone unit capable of interfacing with 3rd party hardware.
The included sensor is designed for oil pressure sensing ONLY. DO NOT use this sensor with fuel, as the sensor will damage due to corrosion over time.
Got my gauge installed. :) Now it's time to find out how to get rid of the electrical miss and tweak on the tune.
I just found PLX arf gauges for 179.00 with shipping. For details pm me
allen grounded one wire and has only one in cab wire to tune on the fly with mine...Quote:
Originally Posted by RedHeartbeat
i have my v gauge hooked up to a plx controller so yes i will work.Quote:
Originally Posted by RedHeartbeat
I've been looking into a dm6 and/or dm100 for awhile now but just haven't brung myself to cut the fat check for one... I'm sure if I did my own tuning I would definitely gotten one by now though.
Quote:
Originally Posted by skinny chicken
you seling one or what?