FS Nelson Performance custom grind cam

This is a Nelson Performance cam shaft that is proven to put down good numbers. I am going a different route right now so I decided to pull this one out.

Its a 228/230 on a 112 lsa, very streetable. I DD the truck and it was able to run a 12.01 @ 114 and still get 15-16 mpg. I could keep up with cars that trap 117 no problem.

I am asking $200 for it or OBO.

http://i70.photobucket.com/albums/i1..._/2ac5c99b.jpg

http://i70.photobucket.com/albums/i1..._/1ffc668a.jpg

And for those who don't know I am out of Austin TX

How many miles did you put on it Ricky? And how much lift?

What cam you running now Ricky???

Quote:

---

Originally Posted by sleeper1500

How many miles did you put on it Ricky? And how much lift?

---

The cam has about a total of 6,500 miles on it, I just put it in Jan of 2010 and purchased it with less then 2k miles on it. Lift is .588/.591

Same cam i have in the GTO, probably one of the best cams out for the 6L. I bet it'd do awesome in a 5.3L as well, or a 4.8L that wanted to be crazy!

how would it act on a turbo 5.3?

Quote:

---

Originally Posted by bk_cauley

how would it act on a turbo 5.3?

---

this was such a popular cam for us to install when the GTO came out that a lot of guys chose this cam, then later decided on a tvs,112,aps turbo setup, but didn't change the cam.
so, to answer your question, it worked pretty good in a FI application. The last gto we did had this cam, 8psi and headers, laid down a respectable 590hp in the end.

the aps gto we did had this cam as well, and it was stronger than the aps, but we never dyno'd it.

Quote:

---

Originally Posted by farmtruc

this was such a popular cam for us to install when the GTO came out that a lot of guys chose this cam, then later decided on a tvs,112,aps turbo setup, but didn't change the cam.
so, to answer your question, it worked pretty good in a FI application. The last gto we did had this cam, 8psi and headers, laid down a respectable 590hp in the end.

the aps gto we did had this cam as well, and it was stronger than the aps, but we never dyno'd it.

---

would this be a good cam for the escalade? :naughty:

Quote:

---

Originally Posted by TurboMic

would this be a good cam for the escalade? :naughty:

---

i wouldn't be scared to put it in a big truck, i'd do it.
it'll definitely wake up the mid range and topend for sure!!!!

in my gto, it has plenty of lowend as well, but it's a tad lighter, but not much lol, heavy ass gto hahha

What kind of stall would you run with this?

I used to run that cam on my 408 then went to bigger cam but didn't gain very much.

Sold, Thanks Allen for suckering in the fool who bought it.

sucker born every day..... :naughty:

To who ever bought it, you better hurry up and get it. I am using it as a butt scratcher and the rash is back...

lol, just keep it lubed up so it doesnt rust....

This is the worst cam that I have ever used in a 6.0. It's SOOOOOO Small. Who ever bought it probably has no clue anyway

good, will work great on my 4.8....lol

Quote:

---

Originally Posted by TurboMic

good, will work great on my 4.8....lol

---

Yes it will work great on it. Just don't put it in...

I cant wait to install this. Thanks again Ricky

Quote:

---

Originally Posted by ducky

I cant wait to install this. Thanks again Ricky

---

No thank you David. You know your money is no good here, just buy me a breakfast or something

Oh ill give you more than just breakfast.

http://pawsru.org/m/src/m1136_Moar2.jpg

lol

i REALLY wanted this... :(

Quote:

---

Originally Posted by bk_cauley

i REALLY wanted this... :(

---

$250 w/o shipping and its yours

yea.....

ok your really playing hardball now. 275 shipped and its yours

Do you know how many lap dances i could get with that extra $75

about 7 of them on tuesday night, however, that only leaves $5 for a tip, which probably won't get you the 2nd dance.

damn this cam runs good in my truck! thanks for the sweet deal on the cam ricky!

soooooo........... is the cam still for sale.if so,free bump.