Suspension Guide Lowered/Lifted

Ok so I know one of the most asked question when someone see's a truck on this site is how low is your truck and how did you lower it or how high did you lift your truck and what componets did you use. So this thread will be for every one to post a picture of there truck with a list of componets you used to lower/lift and how low/high your truck is. And if you could post your tire size also. Thanks Ben

Ill start

Lowered 3front 6rear
Beltech coils
DJM Flip kit
Falken 275/45/20
http://i200.photobucket.com/albums/a...cferrin155.jpg

Truck is in sig.

DJM 3" LCA's
6" flip kit
general grabber UHP
265/55/16

http://i385.photobucket.com/albums/o...o/DCAM0055.jpg
http://i385.photobucket.com/albums/o...o/DCAM0053.jpg
http://i385.photobucket.com/albums/o...o/DCAM0051.jpg

djm 4in upper and lower control arms
djm 6in flip kit
nitto invo 285/30/22
after all said and done it turned out to actually drop it 5/7 and i have no rubbing issues

Truck is my avatar:

2/4 Drop

DJM 2" Coils
DJM 4" Shackel / Hanger
245/75/16 Dunlops

I know it's much but.
2" rear lowering shackles
305/40/22

:LOL:

6" Rough Country Suspension Lift (Cranked to about 5.5")
3" Performance Accessories Body Lift
1" Rear Lift Shackles
(I have a Zero Rate Add-a-leaf Im bout to put in the rear to level it but you could picture it)
35x12.50x17 Super Swamper SSRs / 17"x9 Moto Metal 951s

http://i5.photobucket.com/albums/y19...0830080702.jpg

http://i5.photobucket.com/albums/y19...0830080703.jpg

http://i5.photobucket.com/albums/y19...830080703a.jpg

just 2in shackles on the back....

Truck pic in sig.

Stock suspension (Z85) in front
2" Leveling shackles in rear with stock leafs
Monroe shocks
275/45/20 Sumitomo HTR Sport H/P

front
2" belltech spindles
3" belltech springs

rear
6" DJM flip kit
2" DJM shackles

275/45/20 toyo proxy S/T
http://i4.photobucket.com/albums/y12...04baderrd5.jpg

2006 RCSB/2WD

2" Belltech Coils

2" Shackles
2" Hangers
removed overload

275/60/17 Falkens
http://i52.photobucket.com/albums/g2...1/P2040217.jpg


2004 ECSB/2WD

4" Sprintech spindles

2" Blocks

265/70/16 Goodyear Wranglers
http://i52.photobucket.com/albums/g2...d1/truck99.jpg
http://i52.photobucket.com/albums/g2...DSC00133-1.jpg

whoaaaa when did you get that EC jason?

Quote:

---

Originally Posted by duckysbht

whoaaaa when did you get that EC jason?

---

that was two trucks ago. this one was in between the ECSB and the RCSB
http://i52.photobucket.com/albums/g2...1/DSC00142.jpg

ohhhh ok.. I was like dang already gettin more trucks

2" drop spindles in the front
2" shackles and 2" hangers in the rear!

01 ecsb 2wd

Front:
4" fabtech spindle
3" fabtech spring

Rear:
5.5" Procomp block
2" Procomp add-a-leaf

Shoes:
285x75x16 on mickey 2's with a HUGE offset (stock wont clear spindles)

Clears 35's with lower valance off (I hated that thing anyway)

http://photos-d.ak.fbcdn.net/photos-...23_4629310.jpg
http://photos-h.ak.fbcdn.net/photos-...319_772427.jpg

Quote:

---

Originally Posted by oleshifty

01 ecsb 2wd

Front:
4" fabtech spindle
3" fabtech spring

Rear:
5.5" Procomp block
2" Procomp add-a-leaf

Shoes:
285x75x16 on mickey 2's with a HUGE offset (stock wont clear spindles)

Clears 35's with lower valance off (I hated that thing anyway)

---

blast from the past! got any pics to go with the stats?

^^^i'm a m-f-n rapper yo!! lol

front 12''
2'' DJM spindles
Slam Specialties RE7''
shock QA1 SA
245/40/20

Rear 15''
4 link
Slam Specialties RE7''
KYB gas adjust
295/35/22

Total 12/15 drop...:LOL:

http://i282.photobucket.com/albums/k...s/DSC04859.jpg

2 inch Belltech drop spindles in front
2 inch DJM lowering shackles and 2 inch DJM lowering hangers in back
245/70/16 Cooper Discover's

I also have helper bags in the back that have to have at least 10psi in them. So that keeps the back up a hair higher. I have to have them for when I have my bike in the back.

Front:
Mcgaughys spindles (2")
DJM torsion keys (1")

Rear:
DJM shackles and hangers(4")
Overload swapped for an f150 over load (1")

265/35/22 tires
Belltech nitro drop II shocks at all 4 corners

Total 3/5

Here we have a5/7
McGaughy's 2" drop spindles
Beltech 2" drop coils cut half a coil

Rear is a McGaughy's flip kit and C notch.
Beltech Drop shackles set at 1"
And Doestch Drop shocks.
On 265 50 20 BFG's KDWs
and the drool from your mom looking at it. haha

http://i83.photobucket.com/albums/j3...568640x480.jpg

Quote:

---

Originally Posted by carfreak07

2" drop spindles in the front
2" shackles and 2" hangers in the rear!

---

i like the custom plate "UL LUZE " :lol:

6" procomp suspension
2" procomp leveling kit
3" body lift
37" mickey thompson mtz's