Fuel cell & walbro 255?

waste of time and money to run on race gas period unless you have some high compression

Quote:

---

Originally Posted by mean05

a 5 gallon cell is a little overkill for a dedicated fuel system, i only run about a 1 gallon fuel cell on my systems and along with the 255 FP you will also need a fuel pressure regulator

Here's my old setup i have already done another setup like this in the truck as of last week again....work flawlessly.

http://i78.photobucket.com/albums/j1...8/PIC-0007.jpg

---

Hey bud, I already have an extra battery where your fuel cell is located at..
So, do you use a IN-LINE fuel pump in your setup?? Cause the one I ordered from NP it's a IN-TANK fuel pump.. That's my concern, how will I be able to hold it still in a 5gal fuel cell..

Quote:

---

Originally Posted by mean05

waste of time and money to run on race gas period unless you have some high compression

---

Ok man.. So let's say I want to run it like you, from the fuel cell to the selenoids.. What kind of fuel regulator did you use? And will my IN TANK fuel pump work for a setup like yours?? Thanks guys!

the pump is a inline mounted right on the side of the airbox...the FPR is a aeromotive. Your intank pump could work for it just run a inline FPR.

Why are you worried about running on motor...make them let you spray...it's not your fault they dont have to balls or power to run you on everything you have

Hey man, I looked for aeromotive FPR and I came up with this page,
Aeromotive Fuel Pumps, Fuel Filters, Fuel Pressure Regulators and Fuel System Accessories - JEGS
but there are too many options to choose from, wich one is the one Im supposed to get? can you help me out with that one?

Yeah, i try to make them race me with nitrous, but they keep saying their RCSB hemi only has cat back, programmer, cai, and thats it.. thats why he doesnt want me to race him on nitrous.. I already beat him on motor, but I dont want him to get even close to me..

Now are you guys running race gas or like meth.

put theis PN in 027-13105

Quote:

---

Originally Posted by 6.0vortecchevy

Now are you guys running race gas or like meth.

---

race gas...anything unleaded so up to 110, i use 105 usually

Quote:

---

Originally Posted by mean05

put theis PN in 027-13105

---

Hey Mean, I have a 2 stage nitrous setup, will that work still for my setup?? is the same pressure required with a single stage or a 2nd stage?

yeah it will work, just use a Y fitting after the FPR...mine was also a 2 stage setup and i just set mine up with a 60psi setting