Forum: Powertrain

Where s the best place to get my truck dropped as far as expence adn quality work. I was thinking of a 3/5 on my 04 single cab. Id prefer south/east...

Well, to take mine off I have to unbolt the exhaust, remove the crossmember, jack up the tranny, and pull and twist like hell to work the pan out. ...

ok im doing a cam for my turbo, and i called lunati and they gave me these numbers and ive never seen anything like it, so i wanted to get some...

OK, 8budfan was great to give me a set of 4.10 gears. 14 bolt 10.5 diameter. So far the shops that I have called are quoting 600 to 750 bucks on...

Well, finally changed from 3.08s to 4.10s. Awesome difference in acceleration. Now my heavy truck can really dig itself out of the hole. I...

Hey guys, anyone want to post what is exactly needed in order to swap from the wimpy 4L60E to the 80E? I'm also thinking about this in the future...

Okay I haven't been around in awhile because I've had some other things going on, and been trying to plan what I want to do when the motor work...

Well we're stuck with the stock waterpump, which seems fine. My thinking on this is ... Wouldn't a two core 34" radiator with a 180° thermo cool...

I knew this was going to happen to me sooner or later, but why now?! Truck will not stay in OD. I have to give it gas for it to shift in to OD, and...

ok after 4 bottles in 2 weeks on a 150 shot, my tranny slips really bad after 4k in second gear then it wont shift into 3rd at WOT, with or without...

I've got an 01 ls6 cam that I am going to install probobly this week. I am just wondering what to expect.... How is it? What year ls6 cam was...

I was trying to figure out what gears to get for my truck and had to work out this formula. You can enter any transmission or rear end gear or tire...

which of these should be done on a bolt on 5.3 "with maybe a cam later" while not pulling the trans? :help: and with stock stall 3 -...

Hey yall ! New to the site and have a question about exhausts. I currently have a 3" jardine catback which is dumped over my axle. I figured when...

Hey everyone. As of right now I have the billet servos and a transgo shift kit. I have no washers in the accumulator and my 1-2 shift is just way...

I have an electric fan for my 2002 chevy trailblazer, and i need a shop to install it. Shop name and number would help tons in austin. Thanks

Hey guys I am looking where to but a 4 link with coilovers that you weld on do you have any suggestions ? I haven't started looking yet but figured...

Hi guys, Hi guys, Does anyone know which lines are in and out for the tranny cooler lines on both the 4L60-E and the 4L80-E? The 4L60-E's...

Finally got the billet servos in! I recommend them for it a do-it-yourselfer. They weren't too difficult, but we took our time making sure...

Just wondering what pan every one is running on thier 4L60E. My brother just put a bigger Trans Pan (Mag-Hytec, 4.5 extra quarts) on his Allison...