Forum: Powertrain

Shifts alot better and firmer than the stock. Got the Corvette servo off ebay brand new for 12.99. A mod everyone should do.

:doh: I usually never haul anythin, but a month or so ago , I found myself pulling a 2,500 pound trailer with a 67 dodge polara on top of it :nutz: (...

Dudes, My Gas needle just went nuts, some times it,s ok, othe timer jus flat empty and most of the time bounce all the way, even with tank at...

Hey guy, I just recieved my tranny cooler and am fising to install behind the grill, but I have a question. On the 34" Radaitor what transmission...

where can i get one or how do i make one for as cheap as possible? 04 1500 silvy v8 any body got any pics of one on the newer trucks?

i was just wondering if they were any good, and which inlet oulet i need for my 05 CC? or if you can suggest something good.

I've got an '06 Silverado with a 5 speed trans and I was wondering if there is a peformance shifter (hurst, b&m, etc..) availble for this application?

Is it possible to flip the rear end on a 2004 2wd with just basic tools I want a 3.5 inch dropin the rear and still pull the trailer

I was replacing my header gaskets on the 4.3 the other day, and on the driver side of the engine block there is a sensor that screws straight into...

Went home early today and had my used Magnaflow installed. A dual out the back, resinators before the muffler and a cross over in the muffler. Wow ...

I am fixing to get my cam put in and i want to put the TCI 3000 in, but i would like to have step by step instructions, so i won't miss a step. ...

Dude, I want to use the 200hp shot on my motor. I sprayed 3 times, but with the platinum plug and probably a lean tune. Add that a almost like...

This is a weird one. I changed my tranny fluid and replaced the filter about a week ago. The first time I turned on the truck the odometer started...

I posted the sale of my 216/220 cam on several sites. One site's user responded quickly, then changed his mine b/c he was told by (what he said)...

I HAVE A 4L80E AND I HAVE A NEW STALL. THE BOLT PATTERN IS FOR AN LS1, BUT THE STALL FITS THE 4L80E. HOW DO I ALLIGN AND DRILL THE FLEX PLATE FOR...

Hey guys, I just picked up my 05 5.3 engine from the salvage yard. I was putting it on the stand when I noticed the casting number on the head was...

Hello all, I have a silverado which I installed an ls1 out of a c5 vette. I have a lifter pecking pretty loud. I have penzoil 5w30 in it now, I am...

Finally found someone to install everything for me at a reasonable price. I Love the new cam (Comp XR265HR 212/218 558/563 115lsa). I’m going to...

A good while back I lost my heat in my 94 GMC Sierra. I didnt worry about it much since living in Florida winters are pretty mild. As of lately I...

:grr: when I leave in the morning my truck sounds like it has a rod knocking. It just started this morning was wondering if your trucks were doing...