Engine | Transmission | Drive Axle | Chassis | Fuel
I'm looking at a set of AFR Mongoose 205 heads that have a 66cc combustion chamber. I think the 2004 5.3 has 61cc combustion chambers and 9.4...
Anyone done this swap before? I'm curious what all is required for this, or if it is worth it. I have a New Venture 3500 in my truck with lowered...
I knew this was bound to happen. It blew at the perfect time too. I ended up blocking both lanes of east bound traffic just at the beginning of...
Came across this on performancetruck.net http://www.performancetrucks.net/forums/sh...ad.php?t=371795
I see alot of you guys spending the big $$ on these trannys. We have several behind cars and trucks that should normally eat up a 4L60. Even a 408...
ive got a 2002 silverado with the 6 on 5.5 lug pattern. im changint out the rear end to a strange dana 60 with a 5 on 5 lug pattern. how would i go...
HEY GUYS, MY TRANS SOMTIMES LOCKS THE CONVETER UP AT 30 MLS PER HR. THEN THE TRANNY SHIFTS HARD. I WILL PULL OVER AND TURN THE TRUCK OFF AND...
Hey guys, I was looking to install a drain plug kit on my 4l60e and was wondering if anyone had any advice on where to drill the hole. I'm lazy as...
Dudes, LT1 recive 42 injectors nice Thanks in advace Gabe
Well today a local transmission builder well know installed the corvette servo and the overdrive servo on my truck. I saw that he installed a another...
Has anyone had problems with their stock lifter holding up to an aftermarket cam? When I originally set the preload I had .090” shims on the...
Anyone got any ideas why the vent on the front diff would be puking oil????? I'm wondering if a valve or something has crapped out in the tranny and...
Ok I found a cam I think I am interested in, I dont have the exact specs but I think its like 220/224 on a 112 lsa. I believe Ligenfelter, I was...
Man Alive, I have a tune on my computer but i want to put in a shift kit and servo's, but i dont know what kind to go with, and im hearing of people...
What is a great shift kit to buy, and who is a great shop to purshase one through...
has anyone tried the dynatech long tube setup yet? they are realy pricey but it seems like a realy nice setup, and bolts up to rest of your exaust...
Will oil leaking into a sparkplug wire boot at the plug cause a miss? :duh:
Where's the best place to buy one? I'm starting to plan my next stage for the Av, but after the ol farmtruc is running. I want a 5.3 or 5.7 L...
Has anybody heard anything on this engine that GM is supposedly releasing march of 2007? "Its engineered to handle 2,500hp, all for a price that will...
Ok Dudes, I just open the Super package where My Diabolic Extreme and Radical Turbo cam came and my Petroleum Suck Sea Plataform Injectors came....
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
