Forum: Powertrain

Well tonight lost the 4l60e launched hard in 4hi then nose dived and took off again and only has 1st now.... ftl lvl 5 is going in.... What all will...

Im curious if theres anyway to run a set of longtubes with no y pipe? just for the fact that my truck is so low and i dont want to mess with making...

I am about to buy pacesetter LT's and there off road y. Do you guys have good luck with the clamps sealing? Also when my truck is at wot and goes to...

I'm trying to find a part number for the rubber OEM bump stops that our trucks come with (mine appears to have push into a socket). I cut mine when I...

hey i was talking to a guy today and he was telling me you can just add all the 4x4 parts on to a 2x4 frame to convert it? can this actually be done...

ok so im gunna start building a 383 stroker and im using a kit from white performance eby Item number: 330370159384 and running a 488/510 edelbrock...

Sounds stupid I know but I'm considering going ARP and can't get the stock ones out of the cap. Do I press them out or screw them out? I don't want...

ok guys so i went to get my heads P&P and i was talking to the guy i told him i was gonna go with a asa cam and he says that cam is too small for my...

ok So I have a 2001 4x2 Chevy Tahoe with a DJM 2/3 Drop kit. what are the Biggest tires I can Safly put on it with that drop kit? any imput would be...

Some gaskets don't have a cut out on them for this vent hole so you have to trim the gasket around the hole, sometimes people will used silicone on...

I have a 2006 Crew Cab 1/2 with the 8.6 rear end and I am looking for a yoke that accepts the 1350 u-joint. Anyone know where I can get one?? Thanks

I searched and came up with nothing use able. Here is my situation; I have swapped a bone stock LQ4 into a Toyota Tacoma and bought all Autometer...

I have this FLT trans that probably have on it 5 passes and 3000 miles most...... Today driving it at traffic, real slow, at a 175 temp it stop...

After Much Searching For A Fuel Injection Hose Rated To Be Submersed In The Fuel Tank. I Came Across Gates #27097. Rated At 100psi M.p.f.i. Hose...

i have a 05 4x4 4l60e with 3.42s, does anyone know what a set of 4.10 would put the rpms at 70mph cause gotta drive it everyday on the highway... but...

what heads are best for n/a lq4 6.0 ? I have the 317's casts. would ls1 or ls6 heads work better for n/a ? or should i use the 317's have them gasket...

so i put the djm lower control arms on(4''), well it seems like it isnt lowered all the way, there isnt a way to adjust them is there? to lower the...

My '04 Silverado and my brother-in-law's '00 Suburban both have 5.3s and both have magical disappearing engine coolant. No coolant leaks in hoses,...

Ok so I'm driving home and look down and my oil pressure gauge was maxed out at 80 psi?????? Thought it was a fluke so I shut the truck off let it...