Forum: LSX Truck Conversions

how hard of a swap would this be, and what would i need to get it done?

Completely done with swap, only issue is AC will not work, compressor kicks on but is not cooling, only thing different with a/c system is I tied the...

hey guys, i just put a 6.0 liter in a 93 dually and was wondering if i should run the oil cooler or not.... I cant get it to work as the piping uder...

ok this is my 82 chevy swb it was my first vehicle so its special to me. im thinking i will do a swap to it of some sorts. maybe a 6.0 stoked...

Got everything finished up and ready to go get exhaust but I cannot seem to get the air out of the system, the upper hose is getting hot but the...

I just put an LM7 into my 98 K2500. The swap is going fairly well, but I had a friend come over to delete the EGR, VATS, downstream o2 sensors etc....

Been searching on here for an answer, but every build is different! I have an 88 GMC I'm converting over to a 6.0l 4l80e, what I want to know is...

Okay, this is just me thinking right now. I have a 91 rcsb Z71 that I would like to see get makeover. I have had the truck for about 10 years now and...

To command the PCM to enable a/c idle tables when the clutch cycles to on? 04 PCM with LQ4. Idle was still somewhat stable during clutch cycle after...

Do you that have finished the OBS swap care to post up what you did for an air intake?? How far does the maf meter need to be from the throttle body??

Hi all, I need to know where to cut and box the frame on my 92 4X4, in order to have clearance for my AC compressor. It's a 6.0, out of an '04...

hello i got a question i was wondering if it was possible to cut my existing stock tbi braided lines and add some ans fittings to some quick...

anyone willing to let me use their balancer intaller tool in the dfw area, willing to give a 12 pack:beerchug:

My new project....as if I needed a new one. With this swap, I'll have my weight over the rearend and also with the new shock setup it will ride alot...

Recently put a 2002 5.3 in my 86 K5. Runs great and i love it. Got ac working now but vents are stuck due to no vacumn source. What's wrong with...

I am in the process of swapping my tired old 350 and 700R4 for a LQ4 and T56 in my 1991 Chevy C1500 reg cab step side bed pickup. I am using a set of...

Anyone seen this? Ugly as can be. I have always thought a 454SS build would be awesome, but these guys got it largely wrong IMO. :sadnana: ...

I lowered my truck after the swap, I thought after the swap with the stock suspension on it that it sat higher in the front that it did with the 4.3...

are you guys running the new wire all the way to the pump or using the existing, can i just connect it to the fuel pump 12v wire at the stock relay...

Fired my swap up last night, 2 thumbs up to Jon at nelson performance!! My linkage has issues, the part that runs from the frame to trans is too...