Forum: LSX Truck Conversions

Looking for a part # for a oil cooler block off plate. I heard that you can get one from the dealer, but I had no luck while I was there. Let me...

Who here would be helpful enough to give me some tips to get a LS1 into a 1954 Chevy truck?

I have seen tons of people that have the MAF right off the TB then have a cone filter. Of course I cant find pics now that Im wondering about it. ...

Hey guys i have some common questions which i sure you will be able to help me out with, and give me some advice to if you have any hands on...

I am helping a friend put a 2001 5.3 in a 1995 sub. I know that you need a flywheel spacer, but can you just run a converter from a the truck that...

I have the gm spacer for my 02 6.0 to mate with a TH400. I have ordered two sets of bolts from part numbers on this site, but both were either the...

Hey guys, wondering how to hook up my brake vacuum hose on my 6.0. Don't know if I should just drill and tap a fitting in, or if there is a better...

Hey guys, i just bought a 71 chevelle. it had a 71 vette motor in it with some goodies and a turbo 400 with a shift kit. the oppertunity came up to...

I'm thinking about putting a 5.3 into my '81 2wd longbox and I had a couple of questions. Has anyone swapped a LS motor and 4l60e into one of...

I've located 4 ls motors in a local junkyard and I want to see what they are before buying, but I can't seem to find a way to decode the dot matrix...

Hi guys, I haven't got my 6.0 in my truck yet, but with any hope, this weekend. I have a 2000 silverado soon with a 6.0 and the stock 5 speed...

Still working on my 4.3 to 6.0 swap. Just wondering if I should I try to make something to cover the openings into the bellhousing? The oil pan on...

My fuel pump is rated for 55 -62 psi. I am getting 55 psi fuel pressure through the regulator. Am i using a fuel pump that is a little weak ( meaning...

does anyone know of any postings on plumbing a slave cylinder on a t-56? thanks all kyle

I have a 6.0 lq9, and I am going to put some 205 AFR heads that have been milled to 63 cc with gm head gaskets. Am I going to be able to run 93...

1994 suburban with 2001 6.0L and 4L80e. It finally runs, thanks to David (watdog), only problem I am running into now is the gears want engage. I...

Ok im looking for a 2000-2002 LS1 with auto trans. I have found a few. a 2001 with 40k miles for 3,500 bux and a 2002 with 32k miles for 4,100 all...

Hi everyone, I'm new to the site. I have a 2000 Silverado 1500 with a 4.3 and a 5 speed. I have tore that all out to put in the 6.0, and ran into...

I Would Like To Swap The Supercharged 383 Stoker Lt4 I Have In My Camero To My 01 Suburban 2500 Ls6 Has Anyone Any Help;)

I have been researching for a couple years and am moving forward with the project as my transmission went out in the truck. My current...