Forum: LSX Truck Conversions

Thanks for all the answered questions.I fired up the 56 today and the lq9 sounds good ,its running thru edelbrock stepped headers and flowmaster...

I should have started this thread before I started the swap, but I guess I can start it down since I havent really gotten too far. The truck is a...

some pics of my truck workin on the old 350 the old motor all cleaned up just mookin the motor up

my NBS truck has the 5.3 and that stupid cylinder displacement crap and I want to know if anyone has info on a ls7 swap for these trucks, is it any...

hey guys i need some help i have a 93 chevy 1500, i am about to buy an lq9 the truck has the getrag 5spd manual just wondering about what i will need...

I saw over @ LS1Tech they've come out with a new conversion kit for OBS trucks. Has anyone used this kit? Mostly if anyone used it in a 2dr Tahoe....

lq4 or lq9

ok i have a 99 ecm and harness out of a camaro 6spd car. and a 6.0 out of a 2004-2007 classic truck. im going to use a 700r4 tranny. what do i need...

So i need some help figuring out what im doing, I have a 99 cast 6.0 that i am going to build. I also have a pair of 99 camaro heads and im not sure...

Seems any computer controlled, fuel injected engine these days, rely heavily on a good battery with a good charge. But how much? At what point of...

Just finished my conversion and everything is great, running real well just having idle issues. When I first start the truck it idles at 1k, stays...

So i'm putting an LQ9 in a '65 pickup and figured out a different pulley route for those of you who might be interested. You can take the alternator...

Hey, I'm in the final stages of swapping an LQ4 out of a 2007 Silverado 2500 into my old Jeep YJ. I have an NV4500 in it and so I had the computer...

I have a 92 F/S that had the 4.3 with a 5 speed, and i put a carb'd 6.0 with a T56 behind it. My question is how to adapt from the trucks original...

I started a new thread so maybe we can figure out what's going on between the 96-97's and the 98-2000's. I'm going to post the information from...

I am looking for information on my project... I have a 1988 truck with a 350 & 700R4. I just bought a 38K mileage LS1 either 01 or 02 out of a...

how do the casting 317 heads flow compared to teh earlier iron heads found on the lq4 motor

I am looking to start my 5.3 swap. What are the best vendors to pick up my conversion motor mounts and flexplate and spacer from? I have a guy that...

So I've been neglecting my transmission off for too long now. I currently have a NV3500 in my silverado. I'm going to need a new transmission really...