+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: Paging allen...

  1. #1
    Join Date
    Mar 2004
    Posts
    16
    Anyone know where allen went? I've been looking for him for 2 weeks, no returned calls or anything... I've left 3 voicemails now.
    ------------------------------------------
    2002 GMC Sierra ECSB 5.3
    Richmond 4.56 Gears
    Auburn Posi
    Radix Blown
    2.75" Pulley
    Nelson Tune
    HPTuners w/ Enhanced I/O
    3" Dynomax Superturbo (no cats) w/ QTP E-Cut-out
    160* Thermostat
    Big MOFO Heat Exchanger
    TOG Titanium Coated Headers
    T56 6 Speed Conversion
    Spec Stage 3 Clutch
    Pro 5.0 Shifter

  2. #2
    Join Date
    Mar 2003
    Location
    San Antonio, TX
    Posts
    11,038
    I'm right here! I've gotten two of your voicemails and I've returned all calls, I notice you don't have an answering machine, also , I've been returning calls later in the afternoon for the past week, and sometimes the evening, so I can see why we've been missing each other on the phone.

    I was in austin all day, if you tried to call, that would explain today.

    talk to you soon,

  3. #3
    Join Date
    Mar 2004
    Posts
    16
    Not sure what number you've been calling... if its 405-579-1204, then that's my work number and we're only there from 9-6 m-f and 9-4 sat. My cell is 405-210-7822, you can call that anytime, but most of the time I miss it cause I can't hear it, but leave a voicemail and I'll call right back, or if I see your number as a missed call.

    But anyhow, i'm not bitching, just beginning to worry about ya, you typically always call me back pretty quick so I didn't know if something was wrong.

    I need to get that ECU from you ASAP. This surging is driving me nuts, and no speedo is pretty sucky too.

    remember mods:

    stock 5.3 motor
    radix w/ 2.75 pulley
    big ass heat exchanger
    TOG headers
    Electric cutout
    no rear o2 sensors, no cats.
    4.56 gears w/ auburn posi
    160 degree thermostat
    Most importantly T56 tranny w/ Spec3 clutch


    I also got a speeding ticket a while back. I showed the cop my instrument cluster (with the ABS, Brake, and SES light on) and told him it all poped on when driving home that day. He told me I should have pulled over and had it towed and i'm lucky he didn't write me up for improper equipment. What a shithead.

    BTW did you look at the ECU I sent you back and see why it didn't work? You said you were going to see if it just didn't download the tune right or something. I hope we can get this going pretty soon, i'm beginning to get frustrated...

    Thanks Allen!
    Ryan
    ------------------------------------------
    2002 GMC Sierra ECSB 5.3
    Richmond 4.56 Gears
    Auburn Posi
    Radix Blown
    2.75" Pulley
    Nelson Tune
    HPTuners w/ Enhanced I/O
    3" Dynomax Superturbo (no cats) w/ QTP E-Cut-out
    160* Thermostat
    Big MOFO Heat Exchanger
    TOG Titanium Coated Headers
    T56 6 Speed Conversion
    Spec Stage 3 Clutch
    Pro 5.0 Shifter

  4. #4
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    I see why Allen has been so busy. The STS turbo website shows Allen as "THE" PCM source for the STS turbos. Until their sales slow down Allen is going to be one busy dude.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  5. #5
    Join Date
    Jun 2004
    Location
    george west texas
    Posts
    3,694
    man...while i was there...he had i think 2 magazines call and talk to him so b4 long...he's gonna havto hire some help...all i can say from what i see is...[COLOR=red]it aint gonna slow down at all
    '13 silverado LT...stock

    '11 lt 4x4 z71..tvs1900

    '01 gmc twins 6.0 jakes 400 ladder bars w/ coilovers tuned by nelson performance

  6. #6
    Join Date
    Oct 2004
    Posts
    259
    Man that sucks about the speeding ticked. Hope you all can it fixed soon. Damn Allen your legend huh? Now I know if you do my tuning there will be no problems.
    Had a 91 SB, Open diff, 3.08 gears, stock LS1/T56. 14.8@95.9...sold.
    Now, 90 C1500 350tbi/NV3500....just bought a 5.3...need T56, Swap parts.....

  7. #7
    Join Date
    Mar 2004
    Posts
    16
    Found allen about a week ago. We lost eachother. Just some miscommunication on phone numbers. What's pretty cool is, he sent out an ECU on the 14th. I will get it today (16th) But I got a PM from him tonight at midnight (not sure why he was working on my ecu at midnight, but whatever lol) He said he sent out the one ecu, but he was playing with something else and came up with a better idea, and is sending me out another one today (16th) because he wants to get this thing going good. IMO this is pretty damn cool of a guy. I haven't even gotten this one yet and he's sending me out another. I think I'm going to get a copy of hptuners just so we can both mess around with this thing over email and save some headaches and play with different things.

    Just thought I'd give ya some props allen.
    ------------------------------------------
    2002 GMC Sierra ECSB 5.3
    Richmond 4.56 Gears
    Auburn Posi
    Radix Blown
    2.75" Pulley
    Nelson Tune
    HPTuners w/ Enhanced I/O
    3" Dynomax Superturbo (no cats) w/ QTP E-Cut-out
    160* Thermostat
    Big MOFO Heat Exchanger
    TOG Titanium Coated Headers
    T56 6 Speed Conversion
    Spec Stage 3 Clutch
    Pro 5.0 Shifter

  8. #8
    Join Date
    Jun 2004
    Location
    george west texas
    Posts
    3,694
    that guy never sleeps...i see him on all the time late at night...guess thats the only time he gets to check us out and read his pm's and stuff thanks for everything allen
    '13 silverado LT...stock

    '11 lt 4x4 z71..tvs1900

    '01 gmc twins 6.0 jakes 400 ladder bars w/ coilovers tuned by nelson performance

  9. #9
    Join Date
    Aug 2004
    Location
    Magnolia, TX
    Posts
    3,259
    Originally posted by retsell@Dec 8 2004, 04:16 PM
    Anyone know where allen went? I've been looking for him for 2 weeks, no returned calls or anything... I've left 3 voicemails now.
    Allen doesn't have a pager

  10. #10
    Join Date
    Oct 2004
    Posts
    259
    Allen YOU ARE THE MAN IN TUNING! He's hard to find sometimes and the first time I heard his voice I was like damn Im talkin to LS1Truck.com's legend. Too bad you didnt send me the sticker Allen. I still got respect for u man though man. You rock, just make sure you.....well just keep on truckin!
    Had a 91 SB, Open diff, 3.08 gears, stock LS1/T56. 14.8@95.9...sold.
    Now, 90 C1500 350tbi/NV3500....just bought a 5.3...need T56, Swap parts.....

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts