long tube headers--- more low end
long tube headers--- more low end
All uncoated headers will eventually rust on the surface but good ones don't fall apart....at least in Texas.
Do you have options for collector flanges? Will 3" pipe fit inside the header collectors or do they have to be swaged?
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Hey Red, The outside diameter is 3" the inside is a little less than 2 7/8"
1991 c1500. 5.3l and 4l60e swap in progress, next paint and body.
Welcome aboard Shoenfeld!
The headers come empty on the end, but I'd recommend getting your exhaust shop to spread the connecting pipe out to fit over it, then call up NAPA for some band clamps. The clamps are about 4" wide and have two bolts on them and will seal up the connection.
PN on box: 733-3967
TorcTite
Hey Grayson, sent you a pm on the nbs headers.
thanks,
allen
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
have you tried to test fit them on a 73-87 4x4 yet. is not, send me a set and i will try them out
1979 K30 straight wheel 4X4. 04 6.0 LQ4, 4L80e, NP205, 60 front, 14 bolt Disc Brake rear
those look good
Some nice long tubes from Schoenfeld...