1991 4x4 k1500 6.0 swap header question.

[89sierra]

ok so i totally forgot to take the camera with me tonight to take pictures but i will when i go back tomorrow. on the drivers side right where the header curves where all the tubes join it just slightly rubs the frame. and on the passenger side the header just touches the top ear of the tranmission housing. but this side is because i am running a 700r4 which the housing that bolts the transmission to the motor is a little different between the new 4l60e and the 700. but the good news is there is plenty of clearance for the drive shaft and every where else

[89sierra]

a little late but here they are when i get a chance to put my truck back on the hoist i will post some from the bottom up

[HPICamaroSS]

is the coating on the headers already peeling off?!? ;-(

[89sierra]

yes sir thats the non coated ones. it says right in box that its just paint to stop the rusting for being shipped. once i get the rest of my exhast done. im going to have flanges welded on the ends then have my buddy try to ceramic coat them.