Results 1 to 10 of 17

Thread: Budget 4.3 to 5.3 swap

Threaded View

  1. #1
    Join Date
    Jul 2012
    Posts
    10

    Budget 4.3 to 5.3 swap

    I thought I would post up my budget swap to show how cheap and easily this swap can be done for with a little time and planning.

    My truck was a 2000 Silverado ECSB with the 4.3 and a 5 speed It was basically the truck I wanted but I wanted the 5.3 which they didn't make with the 5 speed. The 2wd ECSB with the 4.8 and 5 speeds are super hard to find.

    So I bought a 1999 Silverado with a 5.3 and a 4L60E as a donor truck. The body and interior were pretty bad off, but the truck ran and drove great, had 134k miles on it and was inly $1300.

    I kept everything I needed for the swap plus some and sold off everything left over. I still need to get a tune done on the ecu to get rid of the SES light for the missing trans components. Without the tune, my total cost into the swap is less than $200

    Purchased
    truck - 1300
    intake, oil pan, RMS, and valve cover gaskets - 100
    a/c accumulator - 26
    spark plugs and flywheel - 120
    clutch kit - 150
    fluids - 80
    Ebay Intake - 60
    FPR - 50
    total spent = 1886

    Sold
    camper shell - 200
    transmission - 300
    4.3 engine - 450
    fender and door - 150
    Tailgate - 75
    rear differential - 200
    scrap metal - 150
    seat - 50
    rims - 75
    y-pipe - 50

    total sold = 1700
    Last edited by robm-951; 09-02-2012 at 07:42 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts