Hey guys, I had some on order, but canceled those, found some better ones.

I have the Alumnastar 2.0's on the rear, unfortunately, there is no 5x5 bolt pattern for the front, just for the small trucks/cars.
So, the closest 5x5 wheel I can get from Weld is the RT-S, S71 series, with a polished center. I like it, it matches close enough, so I'm going with this one.

My trucks current stance is just fine, so I wanna stay with the overall height the stock rim and kuhmo tire provides.
The overall height of the wheel/tire combo: 24.75"
I'd like to keep under a 25" overall height combo.

Here's the link to the wheel I'm getting:
http://weldracing.com/street-perform...15-in-s71.html

I'm actually thinking of getting the center of the Alumnastars coated black as well.

SO, what backspacing/offset do I need to get?
What rim width?

I don't want an extremely skinny wheel up front, but I do want something a lot narrower than the stock rim.
I think the stock rim is a 7 or 8", not sure, so maybe a 4 to 5 inch wheel??

If you have seen something that works well, please post, I'd rather go with a proven wheel/tire setup instead of guessing.
If you have pics, please post.

thanks in advance,
allen