ok i just came across some motors and blocks would like some input. ok i can buy a bare 5.3 block with the all the covers,cam retainer and lifter trays for $80 or i can buy a 6.0 block bare for $300 or i can buy a long block 5.3 for $300. im going to completely rebuild the motor before i put it in the truck regardless of the engine what would you do
What comes with the 6.0? for a little bit more you could buy a rinnung lq4
2000 Silverado ECSB- 5.3 CAI, Pacesetter LTs, ORY- Pipe, Magnaflow XL, E-fan, Ported T/B , Nelson Tuned, Built 4l60e, Circle D Stall, 3.42s G80, 2-4 Drop, Hertz Highs, Rockford 501s
2004 Buell XB12s
Originally Posted by LamboDoNoMo
just the block and main caps no covers or retainers but he has them for extra like 30 with bolts he also has cranks to 30 for a standard and 75 that have turned 10 and checked. he has alot of mis. parts to
I would just spend the extra money on a running 6.0 $300 for a bare block is crazy.
2004 Buell XB12s
where can i find a running 6.0 for that i have looked all over around here and cant they all want like 1000. i was planning on aftermarket rods and pistons
im just weighing my options and the cost im not shure what im doin yet
I'd build a 382 if I were you
2006 SilveradoLittle Black Bitch
382 what bore and stroke is that im going to drive the truck alot
Thats boring it out to 5.7 with a 4" stroker crank
2006 SilveradoLittle Black Bitch
im prolly going to just go iron 5.7 with 243 heads and small cam nothing to huge and a little shot of nitrous thanks for all your help
Posting Permissions
Reply With Quote
