Well I drove to good air in Texas this weekend. I was in Witchataw Fall. The best time it ran up there before the , Cam and converter was 9.70 @ 71 mph. ( Its an 1/8 mile track.) Now it is running a 8.92 @ 78 m.p.h. !! Thats high 13s in the 1/4. That LS1 "HOT" cam pulls way hard up top. I Have a Yank 3000 stall and it stalls to 2800 on the foot brake. I was doing 2.00 to 2.15 60 foots. It is an awsome cam for the money. You just need at least a 3000 stall and a Nelson tune to get it to work.
congrats bro,get some video
very nice, disregard my post in your other thread
I've been wanting to get an idea of what my truck will run...guess I need a converter now haha. What are you WOT shifts at? I got mine at 6200 and i might have allen raise them a little more, because the cam says power to 6500.
Mike
2000 RCSB
'05 LS2 11.5:1 C.R. l K&N l LT's l Torquer V2 l PAC Springs l Manley 7.4's l 92mm TB l LS7 Lifters l Circle-D 3200 l P&P TB l ARP Rod Bolts l LS1 E-fans l Nelson 93 Tune l Brand-X 100 Shot l Walbro 255 l Duals w/ X and Magnapacks l Vette Servo l Transgo S.K. l 30K Cooler l Detroit Tru-Trac l Motive 4.30's l ARP Cap Studs l TA Girdle
Dont know. My tach stops at 6000. It revs past that. I'm guessing between 6200 and 6500.
you were in wichita falls???
what are your mods ?
Mods are K&N CIA, Pacesetter shortys, 3 inch cat back with a cut out and 40 series Flowmaster, LS1 hot cam, Yank 3000 stall, and a Nelson tune. The truck came factory with 3.73s and E-fans. I run on 30x10.50 Hoosier slicks. The Fuzzy Dice on the mirror help alot too. The next mods are going to be Longtubes, off-road Y-pipe, and 28in slicks. I would also like to do some suspention mods to get my 60 ft down.
Last edited by otter; 06-23-2009 at 11:27 PM.
I hate GMPP. In my world that means General Motors Protection Plan and it makes old vehicles pay me warranty time. Sucks.
The much-hated "hot-cam" is under-rated. Nice to see somebody posting up his positive results. Congrats!!
2001 ECSB 4x4, 5.3, Radix, 3.0 pulley, VHP Trucker cam, 216/224 .551/.551 115 lsa, 1.8 Crane roller rockers, 4L65E, Yank SC3000, 3.73, Cal-Tracs, HPTuners.
Otter, do you have a 5.3? Just wondering, because i've never seen you post about displacement
Big slow mud truck with a TUNE!!!!!!
Posting Permissions
Reply With Quote
