when i cleaned my maf today at my buddys shop it stoped my motor from sruging with a/c on and in gear.When he look at it he triped out and asked me wheres the screen i said i took it out.Dont you guys take those things out,because i took it out about 6 years ago.So is it good or is it bad
i have a 2001 chevy did a 4.8 swap to a 6.0l with mahle pistons 10.5:1,eagle 6.125' h beams,232 238@50.595 598 lift on a 112lsa,243 heads,44lbs motec IIs,tuned by Nick D,it makes 402rwhp,@5000lbs w/ me in it 13.75@101mph on 22' wheels
when i had a maf mine was always gone. some say it makes the vehicle run funny. i never experience this in a 100k worth of miles.
2002 Lightning - GT headed 5.5Litre w/ Twin 7665s
2002 Silverado - 427Lsx w/ Twin gt4202s
2010 Silverado crewcab Z71 - 5.3litre w/ procharger
2000 Wrangler - 5.3litre with some stance
2014 Xsport- 3.5 Eco boost
412 Motorsports
it ain't that I'm too big to listen to the rumors, It's just that I'm too damn big to pay attention to 'em..That's the difference
dont mean to but in. but i thought the screen was to smooth out air flow but any way did u guys notice any difference in your truck power wise?
06 GMC 2500HD EC/SB 6.6 LBZ allison 6 speed, 4" MPRP turbo back, QS2 on the 70HP tune
2000 chevy2500 RCLB 6.0
4L80E,4.10s,aem intake,180 t stat,ported tb,descreened maf, true duals with high flow cats and 40s dumped, lt285/75r16 MTs,an a hypertech programer for now saving for a custom tune now its dead
15.9 at 88 with mudd tires
1973 chevy k10
1989 chevy k1500 stepside
Most responses I've seen said that there was no noticeable gain and it made their truck run bad. They ended up replacing it with one that had the screen.
2004 Silverado Crew Cab, forged iron 5.7, STS w/MP turbo, 10+ psi, FMIC, Tial 50mm BOV, Vic Jr, Snow performance meth, MTI Stealth cam .220/.220 .581/.581 115lsa, Comp chromoly pushrods, Yank TT3000 stall, LS1 Efans, 160 tstat, Trucool 40k trans cooler, 60# injectors, Walbro fuel pump, Patriot springs, Built 4l65E w/billet input & output shafts, Eaton posi, SD tuned...all installed by Klein North Automotive
Mine have been removed on all th vehicles Ive ever owned. No problems yet.
2000 Silverado ECSB- 5.3 CAI, Pacesetter LTs, ORY- Pipe, Magnaflow XL, E-fan, Ported T/B , Nelson Tuned, Built 4l60e, Circle D Stall, 3.42s G80, 2-4 Drop, Hertz Highs, Rockford 501s
2004 Buell XB12s
Originally Posted by LamboDoNoMo
i was lookin around online and it said that u can have the maf tuned so u dont need a screen anyone else
06 GMC 2500HD EC/SB 6.6 LBZ allison 6 speed, 4" MPRP turbo back, QS2 on the 70HP tune
2000 chevy2500 RCLB 6.0
4L80E,4.10s,aem intake,180 t stat,ported tb,descreened maf, true duals with high flow cats and 40s dumped, lt285/75r16 MTs,an a hypertech programer for now saving for a custom tune now its dead
15.9 at 88 with mudd tires
1973 chevy k10
1989 chevy k1500 stepside
I took the one out of my Blazer for no reason and no gain or loss. I left it in the Denali 'cause it's supposed to be there and is supposed to "straighten" the air. Not sure. It's kinda like the TB bypass IMO.
Mine came stock without a screen. fwiw
01 Silverado
ok i think ill pull mine and see what happens
06 GMC 2500HD EC/SB 6.6 LBZ allison 6 speed, 4" MPRP turbo back, QS2 on the 70HP tune
2000 chevy2500 RCLB 6.0
4L80E,4.10s,aem intake,180 t stat,ported tb,descreened maf, true duals with high flow cats and 40s dumped, lt285/75r16 MTs,an a hypertech programer for now saving for a custom tune now its dead
15.9 at 88 with mudd tires
1973 chevy k10
1989 chevy k1500 stepside
some like it some dont! IMO!!!!!!!!
Her name is A Meli-
"If everything is under control, you are going too slow."- MA
Posting Permissions
Reply With Quote
