+ Reply to Thread
Results 1 to 10 of 13

Thread: got a rearend problem !

Hybrid View

  1. #1
    "he said if you build it tight for race appl,you would eat the gears in no time ,if you build it like street gears itll probably happen again thats why i asking for reccom,or suggetions too ask or tell him to do " Find a differant Tech !!!!!!
    Yep you could look like this. Carrier gears driveshaft cover yoke and joints all dead.

    Last edited by zeake; 07-26-2007 at 04:47 PM. Reason: reread topic
    99RCSB Broke because I wasted thousands and thousands of dollars on my truck.

  2. #2
    Join Date
    Oct 2005
    Location
    Baton Rouge, LA
    Posts
    997
    I agree with zeake. Find a different shop all together. A couple of friends of mine that had G80s look like the carrier pic that zeake posted. I'm guessing this guy told you with regards to installing the ring gear closer to the pinion vs far away. If he "knows" what he's doing, he knows how to install gears correctly, and it won't matter how you run your vehicle.
    Test-n-Tune (Nov 23, 2008) - 13.65s @ 98mph

  3. #3
    swap in a 9.5" axle. you could get one used that has a 6 lug pattern for about the same price as a gear swap, if you do it yourself.
    38" swampers, 350 tbi, 14 bolt rear, 10 bolt front

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts