Well I figured out what my fuel pump problem is

[Shahnp1]

Thats the coolest way to lift a bed ive ever seen. it makes sense wish i would of thought of that before, could of saved me alot of time in the past.

BTW glad u figured out your problem

[RedHeartbeat]

The fp wiring has been an issue for quite some time. They under designed the connection and then they short out. My Astro had the same problem. The replacement pump came with a new larger connector.

I like the bed lifting idea, also, but my bed would be in the middle of the street as soon as it lifted high enough to clear the bumper. Steep driveway.

[1slow01z71]

Does anyone have a stock bucket laying around, I just need the connector off of it, in order to get that from the dealer I have to buy the whole assembly which is over 500 bucks even with my discount.

[02CHEV]

cody you have mail

[1slow01z71]

cody you have mail

Where? I dont have a PM or email.

[1slow01z71]

Copy paste from my pt post, I dont know what the hell is going on

Yes the ECMB fuse is good. Here is what happened. I spliced in the new "updated" plug then plugged in the FP and you could hear it come on, so I dropping the bucket in the tank, hooked up the 3 hoses, the map sensor looking thing, the lock ring and turned the key and little fuel dribbled out of the end of the hose. I figured it was just because the lines were dry and 3seconds wasnt enough to get alot of pressure going etc. So I turned the key on/off a couple more times and a little more would come out each time. Randy tells me there should be a ton of fuel pouring out when I turn the key on and its not. I tried using the "prime" slot in the underhood fuse panel by getting power off that power terminal right by it that you get to by taking the big plastic cover off. When I jumped it the pump didnt come on. So I went back pulled the pump out, disconnected the plug from the pump, tested the + side of the plug and it had no power with the key turned on(during the start up 3second cycle) so I checked on the factory harness side of where I spliced the new plug in, no power there. I checked to make sure my relay was still clicking and it was, checked the fuse, it was still good. At that point I got pissed and now here I am on the couch on the internet. Im losing my patience with this POS. I looked at how the wiring is routed and chasing wires up under the truck is not an inviting task What I dont understand is last night with the original(old style) plug I had power to it, no with the new plug spliced in I dont, I could understand that but I dont have power before the butt connectors where I spliced in the new plug, thats what baffles me. I dont know how all the sudden I dont have power at that point when nothing changed except dropping the damn pump in the tank.

[02CHEV]

Where? I dont have a PM or email.

sorry having problems with my compooper I will try again

[02CHEV]

here r the pics


hopes this helps