<div class='quotetop'>QUOTE(Allstar55566 &#064; May 18 2007, 12&#58;16 PM) [snapback]93912[/snapback]</div>
mine hits as well, from what ive heard that is very common. also my steering shaft is rubbing but i think its motor mounts issues on that one. im replacing the crumple zone(ridges) in the shaft with a straight 1 inch piece of stainless steel to fix the problem.
[/b]

I fixed the steering shaft problem by shortening the bolt that goes through it, but the header hitting the frame isnt good....I wouldnt think the motor mounts would be bad or weak, aluminum engine should be lighter. If I cannot cure it then motor mounts will be put in. I pulled it over with a ratchet strap earlier and sprung it a little so now I have some clearance but not enough for when I get on it, it twist right into it.

thanks for the reply and keep em coming maybe someone else has encountered this&#33;&#33;

Jarrod